Pro Plumbers

It’s a family event in late October when many American households carve a pumpkin into a Halloween jack-o-lantern. The kids delight in the whole process, especially when mom and dad let junior scoop the pumpkin pulp out of the pumpkin. But what happens next is the scary part. Often, those slimy pumpkin guts are pushed down the sink drain then the disposal is turned on to chop it into tiny bits before the water washes it away. Except, it doesn’t quite ... Read More >
“Don’t assume that every Mr. Fix-it advertising his services in the local Pennysaver or on Craigslist is a licensed plumber,” says one New York plumber. There is no national standard for issuing licenses. Some plumbers are licensed by the state, others by the counties they work in. Check with your local city hall or chamber of commerce. They should be able to direct you to the appropriate source for a list of licensed plumbers in your area.
Much of the plumbing work in populated areas is regulated by government or quasi-government agencies due to the direct impact on the public's health, safety, and welfare. Plumbing installation and repair work on residences and other buildings generally must be done according to plumbing and building codes to protect the inhabitants of the buildings and to ensure safe, quality construction to future buyers. If permits are required for work, plumbing contractors typically secure them from the authorities on behalf of home or building owners.[citation needed]
Needed to replace a water pressure regulator.  Looking at the retail costs of the regulator, they seem to run from abouit $60 to over $300 for one that includes more that the basic control of water pressure in the house.  Had not used a pro plumber for over 20 years so I was not up on the costs associated with needing their help.  I was contacted by at least 3 plumbers but only one, Right Now Plumbers, gave me an instant quote of $394  for the service without me even asking. Although I thought this price seemed a little high for a job that takes less than an hour to complete, I accepted their service.  Must say that the job was done very professionally and would use them again if needed.  However,

A plumber’s reputation depends on your satisfaction. As a result, any plumbing service professionals you book through Handy will take their responsibility to you very seriously. They will want to turn up on time, bring the right equipment and get the job done as professionally as possible. That way, they know you’ll leave them a good review and they’ll get more work! To give you further peace of mind, every plumbing job done on the Handy platform is backed by the Handy Happiness Guarantee. This means that, in the unlikely event that you’re unsatisfied, Handy will work hard to make things right.
Because your plumbing system is so important, our Oahu plumber is honored by the fact local residents and businesses have trusted us with all of their plumbing needs for over three decades. We believe that we have been so successful because in every project we undertake we strive to honor the trust Oahu has shown in us by putting our best effort forward to provide the highest quality plumbing services. Our Oahu plumber would be excited to continue this tradition of excellence with during your next plumbing project.

 CON'T FROM COMMENTS EARLIER.  However,  the  installation took less than 3/4/ hour and was a basic regulator with no other function.  Looking up the price afterwards, invoice did not list type or price, it appears that it would have cost me around $60 for the regulator and another $15 or so for the additional supplies necessary to install it and it was really a rather simple job with easy access.    Given that, it seems that $300 for less that  an hours worth of on site work,  company says it does not include commute time in its prices, is a little high.  While flat rate quotes are nice, they must take into consideration situations where the work load differs depending on the circumstances.  Therefore, unless you are at the upper end of the harder work needed than the average job. it can be argued that my estimated price of $300 for labor was more than a little high.  Maybe I am wrong since I have not used their services for years and  am not knowledgeable of the costs of equipment and professional labor today.  
We offer service on all makes and models of heating and cooling equipment. Our skilled HVAC technicians and plumbers hold the highest industry certifications and receive ongoing training. This ensures you receive dependable service with every visit. Castle Rock residents depend on us for all their plumbing, heating, and air conditioner services. As a local, full-service plumbing company and HVAC company, we are ready to help.
When a plumbing emergency strikes, you need dependable and quick service from a licensed, reputable Dallas plumber. Regardless of whether your emergency is a burst pipe that is causing water to flood into your home, a sewer line clog resulting in a backup of wastewater, or a gas leak; you can rely on a fast response from the licensed professionals at Baker Brothers Plumbing, Air Conditioning & Electrical. Our technicians are on call 24 hours a day, seven days a week.
Plumbing fixtures are exchangeable devices using water that can be connected to a building's plumbing system. They are considered to be "fixtures", in that they are semi-permanent parts of buildings, not usually owned or maintained separately. Plumbing fixtures are seen by and designed for the end-users. Some examples of fixtures include water closets[32] (also known as toilets), urinals, bidets, showers, bathtubs, utility and kitchen sinks, drinking fountains, ice makers, humidifiers, air washers, fountains, and eye wash stations.

Don’t try to repair, replace, or install faulty or broken plumbing equipment on your own. Hire the top plumbers in town to take care of your needs! We’re capable of detecting the source of the issues fast. Trust us to advise you on the most effective solutions custom-tailored to eliminating them. Our Cincinnati plumbing company always comes prepared with the best tools and equipment. We also provide upfront pricing and money-saving deals and specials to keep more money in your pockets.
The thicknesses of the water pipe and tube walls can vary. Pipe wall thickness is denoted by various schedules or for large bore polyethylene pipe in the UK by the Standard Dimension Ratio (SDR), defined as the ratio of the pipe diameter to its wall thickness. Pipe wall thickness increases with schedule, and is available in schedules 20, 40, 80, and higher in special cases. The schedule is largely determined by the operating pressure of the system, with higher pressures commanding greater thickness. Copper tubing is available in four wall thicknesses: type DWV (thinnest wall; only allowed as drain pipe per UPC), type 'M' (thin; typically only allowed as drain pipe by IPC code), type 'L' (thicker, standard duty for water lines and water service), and type 'K' (thickest, typically used underground between the main and the meter). Because piping and tubing are commodities, having a greater wall thickness implies higher initial cost. Thicker walled pipe generally implies greater durability and higher pressure tolerances.
We have been around for nearly a century! Established in 1920, Bud’s Plumbing & Repair Service knows the exact needs of Evansville residents and commercial property managers. We know what products work best with certain properties, which solutions will give you the best value for your money, and what you can do to prevent the same problem from recurring.
Occupational employment projections are developed for all states by Labor Market Information (LMI) or individual state Employment Projections offices. All state projections data are available at www.projectionscentral.com. Information on this site allows projected employment growth for an occupation to be compared among states or to be compared within one state. In addition, states may produce projections for areas; there are links to each state’s websites where these data may be retrieved.
Sometimes a faucet leak can be stopped by replacing the rubber washer at the end of a faucet stem or cartridge.  This is a more common repair on older fixtures when things were built to last and designed to be able to be maintained.  Other times the whole stem or cartridge needs replacement or the bibb seat deeper back into the fixture needs replacement.  That leads to matching up the right components and often times making a trip to the hardware store or plumbing supply house necessary due to the many varieties, makes and models of faucets.  My advice is to make sure your Plumber has faucet repair kit on their truck before having them come out to assess the issue.

Alexa is an experienced lifestyle and news writer, currently working with Reader's Digest, Shape Magazine, and various other publications. She loves writing about her travels, health, wellness, home decor, food and drink, fashion, beauty, and scientific news. Follow her traveling adventures on Instagram: @living_by_lex, send her a message: [email protected], and check out her website: livingbylex.com
My Mom is in her eightys. I called a plumber in Aug 2012, replaced the McDonnell/Miller LWCO low water cut off 47/2 $675.. Same plumber was called Jan 8,2013 back. He trouble shoot the problem and replaced the same unit, yet I still have the problem. After the heat come on for about 15 mins/ goes off.the pipes connecting to the MM LOCO the vibrating starts, shakes, and makes a loud noise. The boiler is steam, I know it's old. Do I call the same plumber or call someone differently?
Hi Ginger, We're sorry you had this experience with a plumber in our network. Have you left the review for the company? We encourage homeowners to share their experiences so others have an honest idea of the company they are hiring. If you would like to speak with a rep regarding your concerns please reach out to [email protected] If you have a review you would like to submit please send it to [email protected] or visit this link: http://www.homeadvisor.com/write-a-review/. -HASupport

The Oatey 8 oz. Handy Pack Purple Primer The Oatey 8 oz. Handy Pack Purple Primer and Solvent Cement contains code-listed primer and solvent cement needed for solvent-welding PVC pipe and fittings. Can be used with up to 4 in. Dia piping. Convenient Handy Pack for storage - just add pipe and fittings. Due to the nature of ...  More + Product Details Close
Also, you might run into a problem where the shower arm is too short or angled too sharply for the shower head you bought. This can happen more with the wand-type shower heads and the wall gets in the way of the wand. You can solve this problem by making sure you buy a shower head that fits or installing an extension arm onto the main shower arm. You can find those the same place you buy the shower heads.
At Len The Plumber, we’ve seen it all when it comes to leaky faucets. Let’s face it – your faucets are some of the most frequently used appliances in your home. All that wear and tear is bound to catch up with them at some point! That’s why we offer fast, full-service faucet repair and replacement in the Baltimore, Washington D.C., Northern Virginia, Delaware and the Philadelphia area seven days a week. Call us today if you need:

The Fluidmaster 400AKRP10 Complete Toilet Repair Kit was The Fluidmaster 400AKRP10 Complete Toilet Repair Kit was designed with performance in mind. The trusted and proven 400A toilet fill valve ensures a quiet and proper fill while the PerforMAX 2 in. Water-Saving Flapper adjusts to maximize water usage with each flush. This complete toilet repair kit also includes a ...  More + Product Details Close
Hello, long story. Toilet line stopped up two years ago. A company used high pressure water to clean line. Didnt work. Came back a second time with a plummer. Spouse was told that the line had collapsed, filled with rocks or tiles. Plummer then disconnected that line put in a second line, punched a hole in my tank, fed the new line in that hole. Now two years later, each heavy rain brings a strong sewer smell into the house. Found out later that there were no rocks or tiles in original line, only a large calcium build up over 25 years that had clogged the original line. I do not know if when the new line was put in, the old line was closed properly or if either line was or should be vented? I would like the original line reconnected and the newer line just removed. I plan then to repair the hole in septic tank where the new line entered with tar or concete. I need someone to fix my smelly home.
I have no problem paying for any service I receive but when Allied Reddi-Rooter came into my home and immediately tell me and them tell me it would cost me 350.00 for them to install a new Rheem water heater (his recommendation) that cost 409.00 I have a problem. If the cost is exactly how Home Advisor indicates then he’s charging 350.00an hour.  I did my homework checked with other plumbers and it. Would not take an hour to remove old and install the new water heater. Thank Goodness I did my research won’t be using their services and I will be letting others know what happen to me. Shame on you Allied
We've talked before about home electrical projects you can handle on your own and now it's time to tackle plumbing. The projects we're covering here mostly deal with repairing things like running toilets and leaky faucets, and replacing fixtures like faucets and shower heads. These are beginner-level projects that are fairly easy to do and can save you a lot of money if you tackle them yourself.
B&L Plumbing Service, Inc. offers a variety of residential and commercial plumbing services in the Kansas City metro area. We are a family owned and operated business and have been satisfying our customers since 1998. At B&L Plumbing, we go above and beyond to take care of our customers and are always ready to take care of any problem that you may have with your plumbing systems. We know your time is valuable. That is why when you call, we will arrive when you need us with a skilled service technician and a well stocked truck ready to troubleshoot, and repair your plumbing problem on the spot.
We know that plumbing problems can be a real headache, which is why the team at Michael’s Plumbing Service is dedicated to not only providing efficient service but also helping you make informed decisions about essential plumbing issues. Customers who join the Michael's Club Service program receive 15% off all services, priority scheduling, no additional service charges or fees, and two annual water heater courtesy safety inspections. We invite you to learn more about us and what we do by watching a few of our videos!
Hello I had a plumber do an estimate for me to replace our copper pipes with plastic as we have no existing walls up in our basement yet...pretty basic job... so we figured we could upgrade as we do live in Northern Ontario and it does tend to get quite cold here in the winters.  We dont have any existing problems with our plumbing right now just figured it would be good time to do the job and perhaps change the pipes to 3 quarter inch for faster flow.  Well I never thought in all my life I would get an estimate back that would state $350.00 an hour in labor...yes that is correct $350.00 an hour...estimated 10 hours for the job to be completed.  So he quoted me $3500.00 for labor alone.. not supplies?  Well needless to say I will be happy with my half inch copper pipes and will happily wait for my bathtub to fill up at a slower pace.  Just wanted to know what your thoughts are on this $350.00 an hour quote?  Thank you and enjoy your day.
No plumber is going to come right out and explain that they don’t have the required license to work for you. So if you know someone who is a great plumber, but they don’t have a license, hire them at your own risk. Licensed plumbers know the local building codes and regulations, have completed a certain amount of hours on the job and are insured. Want to become a master plumber yourself? Here are 28 tips.
The thicknesses of the water pipe and tube walls can vary. Pipe wall thickness is denoted by various schedules or for large bore polyethylene pipe in the UK by the Standard Dimension Ratio (SDR), defined as the ratio of the pipe diameter to its wall thickness. Pipe wall thickness increases with schedule, and is available in schedules 20, 40, 80, and higher in special cases. The schedule is largely determined by the operating pressure of the system, with higher pressures commanding greater thickness. Copper tubing is available in four wall thicknesses: type DWV (thinnest wall; only allowed as drain pipe per UPC), type 'M' (thin; typically only allowed as drain pipe by IPC code), type 'L' (thicker, standard duty for water lines and water service), and type 'K' (thickest, typically used underground between the main and the meter). Because piping and tubing are commodities, having a greater wall thickness implies higher initial cost. Thicker walled pipe generally implies greater durability and higher pressure tolerances.
×