Pro Plumbers

The movement of liquids and gases through pipes is critical to modern life. In homes, water is needed for both drinking and sanitation. In factories, chemicals are moved to aid in product manufacturing. In power plants, steam is moved to drive turbines that generate electricity. Plumbers, pipefitters, and steamfitters install and repair these pipe systems.
toilets work off of siphon.more correctly it's the timely transfer of water from the tank to the bowl through the ports that starts the siphon and carrys the solids and water downstream,thus completing a flush.i also live in florida and due to lots of hard water everywhere can tell you that most likely the toilets are full of deposits and need to be replaced or are of poor quality.all of the toilets from home depot are trash i would suggest getting one from the factory or from a plumbing supply house.DO NOT GET A 1.28gpf...1.6gpf is still legal

Need a quick fix? After having a plumber come out to your house, they might tell you the part needed to fix your toilet or sink issue is going to take a week. Don’t be too amenable if you can’t wait. There’s no shame in working with another plumber who can get the part and do the job when you need it. If you’re doing the job yourself, be sure you know these tips for completing a plumbing fix like a pro.

Most plumbers wont mess with the septic tank. We deal mostly with components inside the house. Did you have a vent pipe in the yard (often looks like a candy cane made of PVC) before the repair but not after? If all he did was replace the line it shouldn't cause a smell inside the house. All plumbing fixtures inside the house should have properly functioning traps. Those traps would create and maintain a water seal against the sewer gases. You should have at least one vent through the roof to equalize pressures within the drainage system. This prevents positive pressures within the system (caused by fixtures discharging into the lines, ie toilet flush) from pushing gas out through the traps, and negative pressures (the waste in line will pull air behind it like your finger over the end of a straw) from sucking water out of the traps.
At Len The Plumber, we’ve seen it all when it comes to leaky faucets. Let’s face it – your faucets are some of the most frequently used appliances in your home. All that wear and tear is bound to catch up with them at some point! That’s why we offer fast, full-service faucet repair and replacement in the Baltimore, Washington D.C., Northern Virginia, Delaware and the Philadelphia area seven days a week. Call us today if you need:
Also, you might run into a problem where the shower arm is too short or angled too sharply for the shower head you bought. This can happen more with the wand-type shower heads and the wall gets in the way of the wand. You can solve this problem by making sure you buy a shower head that fits or installing an extension arm onto the main shower arm. You can find those the same place you buy the shower heads.

If nothing inside the home was altered you should not be getting a smell. Personally I'm confused as to why the repair person would have left the original line there and ran another one through a new hole. I would have pulled the old line up, ran the new line (in PVC) and used the same hole in the septic tank instead of creating a new one. Did he seal up the hole in the tank from the old line?

The easy to install reinforced Wax Toilet Bowl The easy to install reinforced Wax Toilet Bowl Gasket features a polyethylene flange for floor and wall bowls. Packaged in a plastic sleeve in order to maintain its shape. Accommodates 3 in. and 4 in. waste lines (sold separately). Includes a 1/4 in. x 2-1/4 in. E-Z Snap brass bolt ...  More + Product Details Close
Toilets – Sometimes toilet drains are overwhelmed with toilet paper or clogged by non-flushable items that find their way into the drain. Roto-Rooter can clear any toilet drain to restore full drainage and powerful flushes. Our skilled plumbers can also fix problems related to running toilets, leaking toilets, broken tanks and bowls, and toilets that don’t flush properly.
Sometimes a faucet leak can be stopped by replacing the rubber washer at the end of a faucet stem or cartridge.  This is a more common repair on older fixtures when things were built to last and designed to be able to be maintained.  Other times the whole stem or cartridge needs replacement or the bibb seat deeper back into the fixture needs replacement.  That leads to matching up the right components and often times making a trip to the hardware store or plumbing supply house necessary due to the many varieties, makes and models of faucets.  My advice is to make sure your Plumber has faucet repair kit on their truck before having them come out to assess the issue.
Before you get involved with most plumbing projects, you'll need to shut off the water flowing to whatever you're working on. Most of the time, there are easy-to-access gate valves or compression valves that you can turn with your hand. Turn them clockwise all the way to turn off the water and counter-clockwise to turn it back on when you're done. For sinks, look under the sink and you'll usually see two valves—one for hot water and one for cold. On kitchen sinks, you might also see valves for the ice maker on your fridge or your dishwasher. Just turn them all off. For toilets, the valves are on the wall or right on the pipe behind the toilet.
The easy to install reinforced Wax Toilet Bowl The easy to install reinforced Wax Toilet Bowl Gasket features a polyethylene flange for floor and wall bowls. Packaged in a plastic sleeve in order to maintain its shape. Accommodates 3 in. and 4 in. waste lines (sold separately). Includes a 1/4 in. x 2-1/4 in. E-Z Snap brass bolt ...  More + Product Details Close
Our plumbers are licensed, bonded, and insured and meet our rigid trust certification standards. Our services are guaranteed in writing against defects in materials and workmanship. So if you need to repair, maintain, or improve your plumbing or septic system, you can rely on Parker & Sons. Our plumbing service includes a 100% money back guarantee and our customer care policies are unmatched in the industry.
It’s impossible to maintain your desired levels of comfort at home or work without the proper plumbing equipment. From hot showers and reliable kitchen appliances to properly flowing sewer lines and leak-free properties, the right plumbing system can keep you from dealing with a heap of plumbing headaches. Leave it to the plumbing professionals to ensure your equipment operates year-round.
Let's start with the easiest possible project: Installing a new shower head is as simple as it gets. Typically, all you have to do is unscrew the old shower head from the shower arm (the pipe coming out of the wall), clean off the threads on the shower arm and wrap a bit of Teflon tape around it, then screw on the new shower head. It's really that simple (and if you don't believe me, check out the video above from Dummies.com). Do read the installation instructions on the shower head you buy, though. Some are designed not to require Teflon tape and can actually leak if you use it.

My plumbing experience was  to have the plumbing  disconnected under the sink so the counter top and new sink could be installed.  I thought the service  of $115 was high, but usually if there is an additional fees, it is usually rolled into the cost of repairs or labor.  This company also charged 3.75 % for putting it on a credit card, which was not mentioned until I received the invoice in the mail after paying on the phone.
Most typical single family home systems won't require supply piping larger than 3⁄4 inch (19 mm) due to expense as well as steel piping's tendency to become obstructed from internal rusting and mineral deposits forming on the inside of the pipe over time once the internal galvanizing zinc coating has degraded. In potable water distribution service, galvanized steel pipe has a service life of about 30 to 50 years, although it is not uncommon for it to be less in geographic areas with corrosive water contaminants.
Most states and localities require plumbers to be licensed. Although licensing requirements vary, most states and localities require workers to have 2 to 5 years of experience and to pass an exam that shows their knowledge of the trade and of local plumbing codes before they are permitted to work independently. In addition, most employers require plumbers to have a driver’s license.
I had 207 Plumbing come to fix a leak in my ceiling.  It's a terrible, terrible company to do business with.  He came and fixed a broken pipe in the ceiling, and I asked him to check the rest of the pipe to make sure that nothing else was broken, he said everything was OK and charged me $219.00 for 45 minutes and left.  Never cleaned up his mess.  I went to clean up the mess after he left and found there was more damage to the pipe.  I called him to come back, which he did.  He looked at the water coming down from the ceiling, into a light fixture and said he had another job to go to and couldn't come back until next week.  He also wanted to charge me $350.00 to come back.  I told him that was too much and he said he would make an exception and only charge me $219.00.  Now I have major damage done to the ceiling, the light fixture and the floor.  All of this could have been prevented if he had stayed and fixed the problem.  I will NOT hire him again.
It’s impossible to maintain your desired levels of comfort at home or work without the proper plumbing equipment. From hot showers and reliable kitchen appliances to properly flowing sewer lines and leak-free properties, the right plumbing system can keep you from dealing with a heap of plumbing headaches. Leave it to the plumbing professionals to ensure your equipment operates year-round.
How do you know a company cares about the quality of their work? They stand behind it - that's how. At Benjamin Franklin Plumbing, the warranties and guarantees are industry leading because of our experienced technicians and the high quality parts we use. Our technicians are friendly, clean, polite, drug-free and experienced--and our techniques are state-of-the-art, guaranteed!
While you might be tempted to get out your wrench and try and fix those plumbing fixtures, plumbing can be a lot more complicated than you might think. In the wrong hands, even the simplest-seeming of plumbing jobs can quickly become something disastrous or costly. The chances are that, whatever your problem is, your plumber has seen it before and will be able to rectify the situation, quickly and efficiently. Why run the risk of turning a simple job into a plumbing catastrophe, when you can book plumbing services through Handy to nip it in the bud?
The Fluidmaster 400AKRP10 Complete Toilet Repair Kit was The Fluidmaster 400AKRP10 Complete Toilet Repair Kit was designed with performance in mind. The trusted and proven 400A toilet fill valve ensures a quiet and proper fill while the PerforMAX 2 in. Water-Saving Flapper adjusts to maximize water usage with each flush. This complete toilet repair kit also includes a ...  More + Product Details Close

If you have questions about what parts to buy for your fixtures, the folks at the hardware store will most likely have an answer for you. Come equipped with the brand and model of your fixture and, even better, some pictures. They'll point you in the right direction. And if at any point you feel like you're in over your head, call a plumber. Even if you think you have the skills to do the job, there might be codes involved and you often need a permit.


late 14c. (from c.1100 as a surname), "a worker in any sort of lead" (roofs, gutters, pipes), from Old French plomier "lead-smelter" (Modern French plombier) and directly from Latin plumbarius "worker in lead," noun use of adjective meaning "pertaining to lead," from plumbum "lead" (see plumb (n.)). Meaning focused 19c. on "workman who installs pipes and fittings" as lead water pipes became the principal concern of the trade. In U.S. Nixon administration (1969-74), the name of a special unit for investigation of "leaks" of government secrets.
Our plumbing, heating, and air conditioner services range from basic repair and maintenance to extensive sewer line replacements and remodels. Your comfort and safety is our company’s main concern. Our plumbing and HVAC technicians will assess your home’s systems and perform the necessary service to return your plumbing, heating or cooling system to full capacity.
As a family-owned and operated company, we pride ourselves on putting our customers’ satisfaction at the forefront of our services. Everything we do, from beginning to end, is designed to provide optimal customer service. With over 20 years of service, there is a reason the Fort Worth and Azle communities trust us with all their home plumbing projects. Allow us to show you why we are the best.
Much of the plumbing work in populated areas is regulated by government or quasi-government agencies due to the direct impact on the public's health, safety, and welfare. Plumbing installation and repair work on residences and other buildings generally must be done according to plumbing and building codes to protect the inhabitants of the buildings and to ensure safe, quality construction to future buyers. If permits are required for work, plumbing contractors typically secure them from the authorities on behalf of home or building owners.[citation needed]
×