Pro Plumbers

Present-day water-supply systems use a network of high-pressure pumps, and pipes in buildings are now made of copper,[25] brass, plastic (particularly cross-linked polyethylene called PEX, which is estimated to be used in 60% of single-family homes[26]), or other nontoxic material. Due to its toxicity, most cities moved away from lead water-supply piping by the 1920s in the United States,[27] although lead pipes were approved by national plumbing codes into the 1980s,[28] and lead was used in plumbing solder for drinking water until it was banned in 1986.[27] Drain and vent lines are made of plastic, steel, cast-iron, or lead.[29][30]
A plumber’s reputation depends on your satisfaction. As a result, any plumbing service professionals you book through Handy will take their responsibility to you very seriously. They will want to turn up on time, bring the right equipment and get the job done as professionally as possible. That way, they know you’ll leave them a good review and they’ll get more work! To give you further peace of mind, every plumbing job done on the Handy platform is backed by the Handy Happiness Guarantee. This means that, in the unlikely event that you’re unsatisfied, Handy will work hard to make things right.
Plumbers, pipefitters, and steamfitters may use many different materials and construction techniques, depending on the type of project. Residential water systems, for example, use copper, steel, and plastic pipe that one or two plumbers can install. Power plant water systems, by contrast, are made of large steel pipes that usually take a crew of pipefitters to install. Some workers install stainless steel pipes on dairy farms and in factories, mainly to prevent contamination.
Sometimes a faucet leak can be stopped by replacing the rubber washer at the end of a faucet stem or cartridge.  This is a more common repair on older fixtures when things were built to last and designed to be able to be maintained.  Other times the whole stem or cartridge needs replacement or the bibb seat deeper back into the fixture needs replacement.  That leads to matching up the right components and often times making a trip to the hardware store or plumbing supply house necessary due to the many varieties, makes and models of faucets.  My advice is to make sure your Plumber has faucet repair kit on their truck before having them come out to assess the issue.
Plumbers are skilled professionals who are trained to install and maintain pipes and systems for drinking water, sewage and drainage. They usually have trained through four- to five-year training programs, which include apprenticeships, via trade schools and community colleges. Plumbers’ areas of expertise typically go beyond pipes to include mathematics, blueprint reading, plumbing codes and water distribution. They handle plumbing emergencies, such as broken pipes or clogged drains, and install and maintain everything from a new piping system to a replacement faucet. Plumbers also know how to install bathtubs and showers, toilets, water heaters and dishwashers. Plumbers may work on residential or commercial sites, sometimes designing and laying out a pipe system during construction.

I used Go Green Express Home Services for a minor plastic pipe repair under my kitchen sink...The worker did a great job fixing this minor pipe plastic pipe repair( my original pipe was too short and he needed to extended the pipe and then reconnect). It took him less than 10 minutes to fix. I was first quoted $125 +tax but when the worker went to his truck and spoke to whoever he spoke to at the office, the price rose to $155.10 +tax for a total of $167.10...I thought that was a little too high. Will I use this company again, I Don't Know. It would be helpful if they would have a set price list for jobs (minor repairs, Major repairs etc...), then you as the consumer can see beforehand what the cost maybe and work from there with the company. Minor repairs, Major repairs this company should at least have a set-price list. ..The worker was great and efficient and did a good job on the repair but their prices are a bit costly. And yes, I did write this in their review.

Our plumbers are licensed, bonded, and insured and meet our rigid trust certification standards. Our services are guaranteed in writing against defects in materials and workmanship. So if you need to repair, maintain, or improve your plumbing or septic system, you can rely on Parker & Sons. Our plumbing service includes a 100% money back guarantee and our customer care policies are unmatched in the industry.
Most typical single family home systems won't require supply piping larger than 3⁄4 inch (19 mm) due to expense as well as steel piping's tendency to become obstructed from internal rusting and mineral deposits forming on the inside of the pipe over time once the internal galvanizing zinc coating has degraded. In potable water distribution service, galvanized steel pipe has a service life of about 30 to 50 years, although it is not uncommon for it to be less in geographic areas with corrosive water contaminants.

For details about apprenticeship or other opportunities in this occupation, contact the offices of the state employment service; the state apprenticeship agency; local plumbing, heating, and cooling contractors or firms that employ fitters; or local union–management apprenticeship committees. Apprenticeship information is available from the U.S. Department of Labor's Apprenticeship program online, or by phone at 877-872-5627.
Wall thickness does not affect pipe or tubing size.[20] 1/2" L copper has the same outer diameter as 1/2" K or M copper. The same applies to pipe schedules. As a result, a slight increase in pressure losses is realized due to a decrease in flowpath as wall thickness is increased. In other words, 1 foot of 1/2" L copper has slightly less volume than 1 foot of 1/2 M copper.[citation needed]
Hello! My name is Lorinn and I am 26 years old. I have been working in different construction trades for 8+ years now. To name a few I am a skilled in flooring, cabinets/closets, and electrical(fans, fixtures, etc). I’ve gotten as experienced as I am because I genuinely enjoy working with my hands and learning new things. I take pride in my work, and love exceeding peoples expectations.
I think it is rather rude and a bit dishonest for people to not divulge their total fees upfront, an of course we should know to ask. But the normal person wouldn't know the questions to ask until they are burnt once like this, and then there still could be costs for walking up stairs or charge another service call if they need to go somewhere to use the bathroom and come back. THAT ISN'T A QUESTION I WOULD THINK TO ASK.
Wall thickness does not affect pipe or tubing size.[20] 1/2" L copper has the same outer diameter as 1/2" K or M copper. The same applies to pipe schedules. As a result, a slight increase in pressure losses is realized due to a decrease in flowpath as wall thickness is increased. In other words, 1 foot of 1/2" L copper has slightly less volume than 1 foot of 1/2 M copper.[citation needed]
When you have a plumbing issue that needs professional attention, look no further than Handy. No matter how skilled you might be at home maintenance, some jobs should only ever be tackled by a professional, and plumbing is one of them. When you book a plumber through the Handy platform, you'll be booking a plumbing professional you will know just where to look to find the source of the problem and who will have all the right tools and expertise to fix it. 

Plumbers, pipefitters, and steamfitters may use many different materials and construction techniques, depending on the type of project. Residential water systems, for example, use copper, steel, and plastic pipe that one or two plumbers can install. Power plant water systems, by contrast, are made of large steel pipes that usually take a crew of pipefitters to install. Some workers install stainless steel pipes on dairy farms and in factories, mainly to prevent contamination.
Also, you might run into a problem where the shower arm is too short or angled too sharply for the shower head you bought. This can happen more with the wand-type shower heads and the wall gets in the way of the wand. You can solve this problem by making sure you buy a shower head that fits or installing an extension arm onto the main shower arm. You can find those the same place you buy the shower heads.

 CON'T FROM COMMENTS EARLIER.  However,  the  installation took less than 3/4/ hour and was a basic regulator with no other function.  Looking up the price afterwards, invoice did not list type or price, it appears that it would have cost me around $60 for the regulator and another $15 or so for the additional supplies necessary to install it and it was really a rather simple job with easy access.    Given that, it seems that $300 for less that  an hours worth of on site work,  company says it does not include commute time in its prices, is a little high.  While flat rate quotes are nice, they must take into consideration situations where the work load differs depending on the circumstances.  Therefore, unless you are at the upper end of the harder work needed than the average job. it can be argued that my estimated price of $300 for labor was more than a little high.  Maybe I am wrong since I have not used their services for years and  am not knowledgeable of the costs of equipment and professional labor today.  


We are members of St. Gertrude's Parish and we experienced a sewer back up in our basement. I saw BEST Plumbing listed in the bulletin and I decided to give you a try. The appointment was made between 2:00pm and 4:00pm. I received a call from our plumber at approximately 1:30pm that he was in route to our house. BEST Plumbing cleared roots out of our sewer line and operated a camera in the sewer line. They discovered a riser installed improperly, which was broken at the lateral connection. BEST Plumbing made proper repairs, placed sand and backfilled the area. Our plumber was extremely courteous, helpful, and very professional throughout the entire process. We will be BEST Plumbing's biggest fans and appreciate the service. St. Gertrude's Parish
Hi there! My name is Berik, welcome to my profile! I have a more than 2 years of experiences as a furniture assembling and dissembling, home appliances installation, sink drain, fixture lights, outlets and switchers, tv mount, video ring doorbell installation and sound system. Please feel free to ask any questions or concerns I will gladly answer you! Cheers!! See you soon....
Plumbers may not go out of their way to let you know that a toilet or sink can be moved. But if you’ve been working with them on a renovation, and they tell you something can’t be transferred to a new space, ask them to explain to you in detail why not. Speaking of things people don’t want to tell you, here are 10 things your neighbor isn’t being up-front about.
If nothing inside the home was altered you should not be getting a smell. Personally I'm confused as to why the repair person would have left the original line there and ran another one through a new hole. I would have pulled the old line up, ran the new line (in PVC) and used the same hole in the septic tank instead of creating a new one. Did he seal up the hole in the tank from the old line?

The difference between pipes and tubes is simply in the way it is sized. PVC pipe for plumbing applications and galvanized steel pipe for instance, are measured in IPS (iron pipe size). Copper tube, CPVC, PeX and other tubing is measured nominally, which is basically an average diameter. These sizing schemes allow for universal adaptation of transitional fittings. For instance, 1/2" PeX tubing is the same size as 1/2" copper tubing. 1/2" PVC on the other hand is not the same size as 1/2" tubing, and therefore requires either a threaded male or female adapter to connect them. When used in agricultural irrigation, the singular form "pipe" is often used as a plural.[19]
×