Galvanized steel potable water supply and distribution pipes are commonly found with nominal pipe sizes from 3⁄8 inch (9.5 mm) to 2 inches (51 mm). It is rarely used today for new construction residential plumbing. Steel pipe has National Pipe Thread (NPT) standard tapered male threads, which connect with female tapered threads on elbows, tees, couplers, valves, and other fittings. Galvanized steel (often known simply as "galv" or "iron" in the plumbing trade) is relatively expensive, and difficult to work with due to weight and requirement of a pipe threader. It remains in common use for repair of existing "galv" systems and to satisfy building code non-combustibility requirements typically found in hotels, apartment buildings and other commercial applications. It is also extremely durable and resistant to mechanical abuse. Black lacquered steel pipe is the most widely used pipe material for fire sprinklers and natural gas.
Plumbing fixtures are exchangeable devices using water that can be connected to a building's plumbing system. They are considered to be "fixtures", in that they are semi-permanent parts of buildings, not usually owned or maintained separately. Plumbing fixtures are seen by and designed for the end-users. Some examples of fixtures include water closets (also known as toilets), urinals, bidets, showers, bathtubs, utility and kitchen sinks, drinking fountains, ice makers, humidifiers, air washers, fountains, and eye wash stations.
Our plumbers are licensed, bonded, and insured and meet our rigid trust certification standards. Our services are guaranteed in writing against defects in materials and workmanship. So if you need to repair, maintain, or improve your plumbing or septic system, you can rely on Parker & Sons. Our plumbing service includes a 100% money back guarantee and our customer care policies are unmatched in the industry.
plumbers must be asked directly what they charge hourly and if that is in addition to a service charge. The two are separate and I think they have gotten away with outrageous charges because of the potential of water damaging homeowner structures. I had a plumber (not Home advisor) come and replace a part in my kitchen sink that was under warranty---the spray nozzle had been leaking...He charged me $85.00 for 15 minutes of work and I will never use Mr King again.
I thought that my sump pump had ended its life and needed to be replaced. The contractor I found through Home Adviser came out the following day and arrived reasonably promptly. The technician tested the pump and it wasn't responding. He then checked the breaker panel and all seemed well. However he checked to see if power was reaching the outlet, it wasn't so he tripped some breakers and reset them and the power to my pump came on and the pump works so a replacement wasn't necessary. He charged $75.00 which I think was reasonable for a call-out fee and time spent.
At Len The Plumber, we’ve seen it all when it comes to leaky faucets. Let’s face it – your faucets are some of the most frequently used appliances in your home. All that wear and tear is bound to catch up with them at some point! That’s why we offer fast, full-service faucet repair and replacement in the Baltimore, Washington D.C., Northern Virginia, Delaware and the Philadelphia area seven days a week. Call us today if you need:
Plumbing issues can happen at any time of the day and we understand that. No matter what time of the day or night you need help with a problem you can count on us to help fix your issue. We do not charge extra for services calls after hours or at night. Rates are the same day at night only with us! If you have an emergency water damage issue in your home caused by a leaky pipe, faucet, drain or water heater both inside or out we can help.
Hello! My name is Lorinn and I am 26 years old. I have been working in different construction trades for 8+ years now. To name a few I am a skilled in flooring, cabinets/closets, and electrical(fans, fixtures, etc). I’ve gotten as experienced as I am because I genuinely enjoy working with my hands and learning new things. I take pride in my work, and love exceeding peoples expectations.
Needed to replace a water pressure regulator. Looking at the retail costs of the regulator, they seem to run from abouit $60 to over $300 for one that includes more that the basic control of water pressure in the house. Had not used a pro plumber for over 20 years so I was not up on the costs associated with needing their help. I was contacted by at least 3 plumbers but only one, Right Now Plumbers, gave me an instant quote of $394 for the service without me even asking. Although I thought this price seemed a little high for a job that takes less than an hour to complete, I accepted their service. Must say that the job was done very professionally and would use them again if needed. However,
If you have a poorly designed or faulty plumbing system at your Oahu commercial property, it is very likely that your business is not as productive as it should be. At Steve’s Plumbing Service, our commercial plumbers provide a wide range of services to ensure that local businesses have the most efficient and functional plumbing systems possible. We can design and install a fully customize plumbing system to fit the unique needs of your business. We offer our customers commercial contracts so that they never have to worry about their plumbing system again.
Two-handle faucets are most often found in the bathroom, but you see them in some kitchens. Two-handle faucets use three types of mechanisms. The first two are the same as two of the mechanisms used in a single-handle faucet: cartridge and ceramic disc. The third type is a compression (or reverse-compression) mechanism. Compression faucets are the simplest type, using rubber washers that get compressed against one another to seal the valve. They do tend to wear out faster than other faucet types, but are also least expensive to repair.
We know that plumbing problems can be a real headache, which is why the team at Michael’s Plumbing Service is dedicated to not only providing efficient service but also helping you make informed decisions about essential plumbing issues. Customers who join the Michael's Club Service program receive 15% off all services, priority scheduling, no additional service charges or fees, and two annual water heater courtesy safety inspections. We invite you to learn more about us and what we do by watching a few of our videos!
Stopping toilets from clogging is a function of keeping the toilet clear as well as keeping the pipes in the home clear. When the toilet is clogging often, it is best to make sure that the toilet is not being asked to flush a large number of solid products. Typically, the toilet should only be flushed with fluids. If the toilet is being overworked, it will clog. Also, the pipes in the house could begin to clog and force the toilet to clog at times when it appears that it should flush. It is best to contact annual professional cleaning services in order to keep your drains running smoothly.
If your bathroom sink is slowly draining instead of holding water, your problem is super easy to fix. You likely just need to make a quick adjustment to the assembly under the sink. Pop-up drains have an arm that reaches down the drain and connects to a little rod. That rod sticks through the drain pipe and is held in place by a metal strip with holes in it. That strip, in turn, is connected to the little lever or handle you pull on to open and close the stopper. The video above from HomeAdditionPlus has an excellent look at how to make adjustments.
Need a quick fix? After having a plumber come out to your house, they might tell you the part needed to fix your toilet or sink issue is going to take a week. Don’t be too amenable if you can’t wait. There’s no shame in working with another plumber who can get the part and do the job when you need it. If you’re doing the job yourself, be sure you know these tips for completing a plumbing fix like a pro.
Pipe is available in rigid "joints", which come in various lengths depending on the material. Tubing, in particular copper, comes in rigid hard tempered "joints" or soft tempered (annealed) rolls. PeX and CPVC tubing also comes in rigid "joints" or flexible rolls. The temper of the copper, that is whether it is a rigid "joint" or flexible roll, does not affect the sizing.