Pro Plumbers

Let's start with the easiest possible project: Installing a new shower head is as simple as it gets. Typically, all you have to do is unscrew the old shower head from the shower arm (the pipe coming out of the wall), clean off the threads on the shower arm and wrap a bit of Teflon tape around it, then screw on the new shower head. It's really that simple (and if you don't believe me, check out the video above from Dummies.com). Do read the installation instructions on the shower head you buy, though. Some are designed not to require Teflon tape and can actually leak if you use it.
Galvanized steel potable water supply and distribution pipes are commonly found with nominal pipe sizes from 3⁄8 inch (9.5 mm) to 2 inches (51 mm). It is rarely used today for new construction residential plumbing. Steel pipe has National Pipe Thread (NPT) standard tapered male threads, which connect with female tapered threads on elbows, tees, couplers, valves, and other fittings. Galvanized steel (often known simply as "galv" or "iron" in the plumbing trade) is relatively expensive, and difficult to work with due to weight and requirement of a pipe threader. It remains in common use for repair of existing "galv" systems and to satisfy building code non-combustibility requirements typically found in hotels, apartment buildings and other commercial applications. It is also extremely durable and resistant to mechanical abuse. Black lacquered steel pipe is the most widely used pipe material for fire sprinklers and natural gas.

We offer several financing options for new equipment, as well as our Priority Club Membership that grants members exclusive discounts, priority service, annual tune-ups, and much more. Plus, we make it our mission to give back to the community that’s continually supported us for decades. Our team members regularly donate their time, money, and efforts to numerous charitable organizations, fundraising endeavors, and worthwhile causes throughout the Northern Virginia and suburban Maryland area.

plumbers must be asked directly what they charge hourly and if that is in addition to a service charge. The two are separate and I think they have gotten away with outrageous charges because of the potential of water damaging homeowner structures.   I had a plumber (not Home advisor) come and replace a part in my kitchen sink that was under warranty---the spray nozzle had been leaking...He charged me $85.00 for 15 minutes of work and I will never use Mr King again. 
PBT – flexible (usually gray or black) plastic pipe which is attached to barbed fittings and secured in place with a copper crimp ring. The primary manufacturer of PBT tubing and fittings was driven into bankruptcy by a class-action lawsuit over failures of this system.[citation needed] However, PB and PBT tubing has since returned to the market and codes, typically first for "exposed locations" such as risers.
Drain snake. This is a simple, shorter version of the big gas-powered snake that plumbers use to clear clogs deep in your drains. But if the clog is not so deep, owning one of these can save you a good bit of money. They come in different lengths and you can buy powered versions, but a simple 25' snake with a hand-powered crank will set you back less than $25.
For the past 30+ years, BEST Plumbing Service of Cincinnati has served the area by providing the highest quality plumbing repairs and installations throughout the entire area. Our Cincinnati plumbing company, based in Loveland, takes pride in being a family-owned and locally-operated business. Whether your sewer lines, water lines, faucets, drains or toilets need servicing, our team is equipped with the best knowledge and experience to get the issues fixed fast and quick. Our licensed and experienced plumbers are always on standby when duty calls.
We want to be the plumbing company you turn to whether you have an annoying leak, an outdated water heater, drain lines that won't drain, a troublesome boiler, a furnace that won't heat or an air conditioner that won't cool. Whether its an emergency or you are preparing for the coming season, give us a call and we can help you repair or maintain your plumbing, heating and cooling systems for years of great service to you and your family!
Sometimes, a repair job isn’t quite enough. When this happens, we offer expert plumbing installation services from our professional plumbing contractors. We strive to offer customers high-quality water heater installation service, water heater replacement, home water filtration installation, and more. We always suggest the most cost-effective repair or installation options to make sure that our solution meets your needs and your budget.
“Don’t go to the Yellow Pages to find a plumber,” says Berkey’s Bill Stevens. “It’s like guessing lottery numbers. Anyone can make an appealing ad, but that doesn’t mean they are legitimate. In this industry, it’s easy for a plumber who develops a poor reputation to advertise under a different name. They come and go.” Even searching for someone online may end up being a scam using fake reviews. Instead, look for a plumber who is well-established in your community. Check the Better Business Bureau and read customer reviews at sites such as HomeAdvisor, Angie’s List, or Citysearch. Local contractors or plumbing fixture stores can also refer you to a quality plumber, according to Grady Daniel, who owns a plumbing company in Austin, Texas. “Most of these firms won’t work with bad plumbers.” Or simply ask your neighbors for a referral. A trusted plumber that consistently delivers quality service does not remain a secret for very long.
Alexa is an experienced lifestyle and news writer, currently working with Reader's Digest, Shape Magazine, and various other publications. She loves writing about her travels, health, wellness, home decor, food and drink, fashion, beauty, and scientific news. Follow her traveling adventures on Instagram: @living_by_lex, send her a message: [email protected], and check out her website: livingbylex.com

Also, you might run into a problem where the shower arm is too short or angled too sharply for the shower head you bought. This can happen more with the wand-type shower heads and the wall gets in the way of the wand. You can solve this problem by making sure you buy a shower head that fits or installing an extension arm onto the main shower arm. You can find those the same place you buy the shower heads.
Our plumbers are licensed, bonded, and insured and meet our rigid trust certification standards. Our services are guaranteed in writing against defects in materials and workmanship. So if you need to repair, maintain, or improve your plumbing or septic system, you can rely on Parker & Sons. Our plumbing service includes a 100% money back guarantee and our customer care policies are unmatched in the industry.
I had 207 Plumbing come to fix a leak in my ceiling.  It's a terrible, terrible company to do business with.  He came and fixed a broken pipe in the ceiling, and I asked him to check the rest of the pipe to make sure that nothing else was broken, he said everything was OK and charged me $219.00 for 45 minutes and left.  Never cleaned up his mess.  I went to clean up the mess after he left and found there was more damage to the pipe.  I called him to come back, which he did.  He looked at the water coming down from the ceiling, into a light fixture and said he had another job to go to and couldn't come back until next week.  He also wanted to charge me $350.00 to come back.  I told him that was too much and he said he would make an exception and only charge me $219.00.  Now I have major damage done to the ceiling, the light fixture and the floor.  All of this could have been prevented if he had stayed and fixed the problem.  I will NOT hire him again.
Many commercial properties face the same plumbing problems as residential buildings. Usually, the plumbing system is much larger and more complex. The effects of plumbing problems can be much more extensive for commercial buildings, as they can interrupt business and impact profits. So it’s critical that you have a plumbing company you can trust when problems strike to minimize disruption to your operations.

Plumbing fixtures are exchangeable devices using water that can be connected to a building's plumbing system. They are considered to be "fixtures", in that they are semi-permanent parts of buildings, not usually owned or maintained separately. Plumbing fixtures are seen by and designed for the end-users. Some examples of fixtures include water closets[32] (also known as toilets), urinals, bidets, showers, bathtubs, utility and kitchen sinks, drinking fountains, ice makers, humidifiers, air washers, fountains, and eye wash stations.
At Len The Plumber, we’ve seen it all when it comes to leaky faucets. Let’s face it – your faucets are some of the most frequently used appliances in your home. All that wear and tear is bound to catch up with them at some point! That’s why we offer fast, full-service faucet repair and replacement in the Baltimore, Washington D.C., Northern Virginia, Delaware and the Philadelphia area seven days a week. Call us today if you need:

Accurate Leak & Line is specialized in the complete slab leak detection of sub-slab residential or commercial water and sewer piping systems. A combination of the best re-piping and Nu Flow relining repair options is offered to residential customers throughout the state. This wide variety of trenchless or traditional solutions allows our clientele to make the best decisions for their home and their pocketbook. Quality workmanship is always provided in a timely manner on all of our residential jobs, big or small.


If you have a major fix in your home, it’s important to shop around for a plumber to do the work. At least three bids will help you determine the range of the project, so you can weigh the pros and cons of price and the reputation of the plumbers. Get references and contact them. Also, a good plumber isn’t likely to nickel and dime you. For the smaller jobs, check out these 11 plumbing tricks.
Every family will be faced with plumbing problems from time to time, but that does not mean that they must deal with those problems on their own. In fact, it is best if plumbing problems are dealt with by a professional plumber who has the skill and experience to leave your systems safe and functioning. Without the help of a licensed plumber, a homeowner may be saddled with a plumbing issue that they simply cannot overcome on their own. At Petri Plumbing, we are an experienced Manhattan plumber ready to help you and your family with all of your plumbing issues, take a look at what your neighbors are saying in our customer reviews.
Plumbers, pipefitters, and steamfitters may use many different materials and construction techniques, depending on the type of project. Residential water systems, for example, use copper, steel, and plastic pipe that one or two plumbers can install. Power plant water systems, by contrast, are made of large steel pipes that usually take a crew of pipefitters to install. Some workers install stainless steel pipes on dairy farms and in factories, mainly to prevent contamination.
Many commercial properties face the same plumbing problems as residential buildings. Usually, the plumbing system is much larger and more complex. The effects of plumbing problems can be much more extensive for commercial buildings, as they can interrupt business and impact profits. So it’s critical that you have a plumbing company you can trust when problems strike to minimize disruption to your operations.
Don’t try to repair, replace, or install faulty or broken plumbing equipment on your own. Hire the top plumbers in town to take care of your needs! We’re capable of detecting the source of the issues fast. Trust us to advise you on the most effective solutions custom-tailored to eliminating them. Our Cincinnati plumbing company always comes prepared with the best tools and equipment. We also provide upfront pricing and money-saving deals and specials to keep more money in your pockets.
Plumbers, pipefitters, and steamfitters may use many different materials and construction techniques, depending on the type of project. Residential water systems, for example, use copper, steel, and plastic pipe that one or two plumbers can install. Power plant water systems, by contrast, are made of large steel pipes that usually take a crew of pipefitters to install. Some workers install stainless steel pipes on dairy farms and in factories, mainly to prevent contamination.
The thicknesses of the water pipe and tube walls can vary. Pipe wall thickness is denoted by various schedules or for large bore polyethylene pipe in the UK by the Standard Dimension Ratio (SDR), defined as the ratio of the pipe diameter to its wall thickness. Pipe wall thickness increases with schedule, and is available in schedules 20, 40, 80, and higher in special cases. The schedule is largely determined by the operating pressure of the system, with higher pressures commanding greater thickness. Copper tubing is available in four wall thicknesses: type DWV (thinnest wall; only allowed as drain pipe per UPC), type 'M' (thin; typically only allowed as drain pipe by IPC code), type 'L' (thicker, standard duty for water lines and water service), and type 'K' (thickest, typically used underground between the main and the meter). Because piping and tubing are commodities, having a greater wall thickness implies higher initial cost. Thicker walled pipe generally implies greater durability and higher pressure tolerances.
×