Pro Plumbers

I thought that my sump pump had ended its life and needed to be replaced. The contractor I found through Home Adviser came out the following day and arrived reasonably promptly.  The technician tested the pump and it wasn't responding. He then checked the  breaker panel and all seemed well. However he checked to see if power was reaching the outlet, it wasn't so he tripped some breakers and reset them and the power to my pump came on and the pump works so a replacement wasn't necessary. He charged $75.00 which I think was reasonable for a call-out fee and time spent.
When you book a plumber, whether it's to fix a broken boiler or to unclog a drain, you want to know they're skilled enough for the task at hand. Nothing is worse than sending an amateur with a wrench to look at your pipes. Odds are, there will be more damage than when they started. All plumbers on the Handy platform are vetted, verified, and background checked way before they arrive at your home, so you can be sure that they're the right person for the job. 

If nothing inside the home was altered you should not be getting a smell. Personally I'm confused as to why the repair person would have left the original line there and ran another one through a new hole. I would have pulled the old line up, ran the new line (in PVC) and used the same hole in the septic tank instead of creating a new one. Did he seal up the hole in the tank from the old line?


I just had my pipe under the sink unclogged  and new pipes put in $600.00, then they flushed out the pipe from under the sink to the outside pipe $700.00, Total of $1.600.00, I thought that the price was high, I got the plumber from Home Advisors, not sure they had to do all they did but they said I needed the work done.  The same evening hike using the dishwasher I had a leak in one of the pipes they put in, they came back the next day to fix it. Don't know if I will use them again.. They were K&D kitchens.
Plumbers on the Handy platform have experience in fixing all the common (and uncommon) plumbing problems that plague homes. Whether you’ve got a water heater leaking, a clogged toilet, or a blocked drain, chances are that your plumber will have seen and dealt with a similar job before. When you use the Handy app or website, you’ll be connected to experienced plumbers who’ll know exactly what to do, no matter how big or small the job might be.
 CON'T FROM COMMENTS EARLIER.  However,  the  installation took less than 3/4/ hour and was a basic regulator with no other function.  Looking up the price afterwards, invoice did not list type or price, it appears that it would have cost me around $60 for the regulator and another $15 or so for the additional supplies necessary to install it and it was really a rather simple job with easy access.    Given that, it seems that $300 for less that  an hours worth of on site work,  company says it does not include commute time in its prices, is a little high.  While flat rate quotes are nice, they must take into consideration situations where the work load differs depending on the circumstances.  Therefore, unless you are at the upper end of the harder work needed than the average job. it can be argued that my estimated price of $300 for labor was more than a little high.  Maybe I am wrong since I have not used their services for years and  am not knowledgeable of the costs of equipment and professional labor today.  
My plumbing experience was  to have the plumbing  disconnected under the sink so the counter top and new sink could be installed.  I thought the service  of $115 was high, but usually if there is an additional fees, it is usually rolled into the cost of repairs or labor.  This company also charged 3.75 % for putting it on a credit card, which was not mentioned until I received the invoice in the mail after paying on the phone.
When you book a plumber, whether it's to fix a broken boiler or to unclog a drain, you want to know they're skilled enough for the task at hand. Nothing is worse than sending an amateur with a wrench to look at your pipes. Odds are, there will be more damage than when they started. All plumbers on the Handy platform are vetted, verified, and background checked way before they arrive at your home, so you can be sure that they're the right person for the job. 
Some allege that putting a brick in the toilet tank can save water, but doing that can keep your toilet from flushing correctly. Another plumbing tip, avoid liquid drain cleaners. Liquid drain cleaners are also bad news—they eat away at the pipes. Try a plunger or, better yet, a $30 auger. Don’t have either? Here’s how to unclog a toilet without a plunger.
The straight sections of plumbing systems are called "pipes" or "tubes". A pipe is typically formed via casting or welding, whereas a tube is made through extrusion. Pipe normally has thicker walls and may be threaded or welded, while tubing is thinner-walled and requires special joining techniques such as brazing, compression fitting, crimping, or for plastics, solvent welding. These joining techniques are discussed in more detail in the piping and plumbing fittings article.
Every family will be faced with plumbing problems from time to time, but that does not mean that they must deal with those problems on their own. In fact, it is best if plumbing problems are dealt with by a professional plumber who has the skill and experience to leave your systems safe and functioning. Without the help of a licensed plumber, a homeowner may be saddled with a plumbing issue that they simply cannot overcome on their own. At Petri Plumbing, we are an experienced Manhattan plumber ready to help you and your family with all of your plumbing issues, take a look at what your neighbors are saying in our customer reviews.

Hello I had a plumber do an estimate for me to replace our copper pipes with plastic as we have no existing walls up in our basement yet...pretty basic job... so we figured we could upgrade as we do live in Northern Ontario and it does tend to get quite cold here in the winters.  We dont have any existing problems with our plumbing right now just figured it would be good time to do the job and perhaps change the pipes to 3 quarter inch for faster flow.  Well I never thought in all my life I would get an estimate back that would state $350.00 an hour in labor...yes that is correct $350.00 an hour...estimated 10 hours for the job to be completed.  So he quoted me $3500.00 for labor alone.. not supplies?  Well needless to say I will be happy with my half inch copper pipes and will happily wait for my bathtub to fill up at a slower pace.  Just wanted to know what your thoughts are on this $350.00 an hour quote?  Thank you and enjoy your day.
Rick’s Plumbing has been a mainstay within New Haven and Fairfield Counties since 1992. As a premier local plumbing service, we have been around for the community to complete any type of job – big or small. We only hire skilled professional plumbers to complete each task for our customers, ensuring the highest level of service is achieved within the shortest time possible. Whether you are looking for plumbing service or heating service, we’ve got you covered.
I had called Ben Franklin to fix a pin hole leak in the meter horn. Booking an appointment was very easy and the crew (Sid and Brandon) showed up on time. They quickly found out that a stop valve was not working and had to be replaced as well. Sid clearly explained my options and the charges upfront. He dealt with the city for water shut off, went about the job in a quick and efficient manner. Sid was very professional and explained clearly what he was doing. He patiently answered all my questions. Brandon was very practical and frank. As they were finishing up (I had to leave the house for an hour) they spotted a leak in another valve and fixed that also. I thought it was highly ethical of them to do so. Thank you Sid and Brandon!
The projects we've laid out here are particularly simple, but plumbing can be tricky, so if you're ever unsure, don't be afraid to ask for help. These projects are all pretty straightforward, but you never know what will come up, especially with older homes. We've selected some pretty good videos, but do some research and find some other videos if something about your setup looks a little different. The Internet is a wonderful thing.
When something goes wrong with your plumbing system, speed is essential. The faster you address the problem, the better off you and your wallet will be. Water can quickly cause thousands of dollars in damage. Leaks can soak floors, ceilings and foundations, causing rot and mold that may make your home uninhabitable. Get a direct quote from a professional plumber.  Continue Reading
As a family-owned and operated company, we pride ourselves on putting our customers’ satisfaction at the forefront of our services. Everything we do, from beginning to end, is designed to provide optimal customer service. With over 20 years of service, there is a reason the Fort Worth and Azle communities trust us with all their home plumbing projects. Allow us to show you why we are the best.
If you have a major fix in your home, it’s important to shop around for a plumber to do the work. At least three bids will help you determine the range of the project, so you can weigh the pros and cons of price and the reputation of the plumbers. Get references and contact them. Also, a good plumber isn’t likely to nickel and dime you. For the smaller jobs, check out these 11 plumbing tricks.
The video above from Lowe's shows how to fix leaks in all three types of single-handle faucets. Basically, you're going to remove the handle, pop out the mechanism, and replace it or the surrounding seals. If you can spot which part is causing trouble, you can buy each of the pieces individually. Otherwise, you can buy a faucet repair kit for that type of faucet and replace everything at once. Neither option should be very expensive.
I just had my pipe under the sink unclogged  and new pipes put in $600.00, then they flushed out the pipe from under the sink to the outside pipe $700.00, Total of $1.600.00, I thought that the price was high, I got the plumber from Home Advisors, not sure they had to do all they did but they said I needed the work done.  The same evening hike using the dishwasher I had a leak in one of the pipes they put in, they came back the next day to fix it. Don't know if I will use them again.. They were K&D kitchens.

Sometimes a faucet leak can be stopped by replacing the rubber washer at the end of a faucet stem or cartridge.  This is a more common repair on older fixtures when things were built to last and designed to be able to be maintained.  Other times the whole stem or cartridge needs replacement or the bibb seat deeper back into the fixture needs replacement.  That leads to matching up the right components and often times making a trip to the hardware store or plumbing supply house necessary due to the many varieties, makes and models of faucets.  My advice is to make sure your Plumber has faucet repair kit on their truck before having them come out to assess the issue.
It’s time you receive the exceptional plumbing services you deserve. Bud’s Plumbing & Repair Service is here for you 24/7 with the right solution. Know what to expect with our upfront pricing method, honest recommendations, and transparent way of doing business. Call us today at (812) 618-9638 for your free estimate (available during our regular business hours).

We have been around for nearly a century! Established in 1920, Bud’s Plumbing & Repair Service knows the exact needs of Evansville residents and commercial property managers. We know what products work best with certain properties, which solutions will give you the best value for your money, and what you can do to prevent the same problem from recurring.

Two-handle faucets are most often found in the bathroom, but you see them in some kitchens. Two-handle faucets use three types of mechanisms. The first two are the same as two of the mechanisms used in a single-handle faucet: cartridge and ceramic disc. The third type is a compression (or reverse-compression) mechanism. Compression faucets are the simplest type, using rubber washers that get compressed against one another to seal the valve. They do tend to wear out faster than other faucet types, but are also least expensive to repair.


Estimating a plumbing job is best left to the professionals. However, our guides linked to throughout this article are the best first step to understanding pricing. Understanding basic plumbing is an excellent second step. Not only does this help you diagnose potential problems before they become costly ones, but it’ll help you understand what a plumber does.

“Don’t assume that every Mr. Fix-it advertising his services in the local Pennysaver or on Craigslist is a licensed plumber,” says one New York plumber. There is no national standard for issuing licenses. Some plumbers are licensed by the state, others by the counties they work in. Check with your local city hall or chamber of commerce. They should be able to direct you to the appropriate source for a list of licensed plumbers in your area.
If you have a major fix in your home, it’s important to shop around for a plumber to do the work. At least three bids will help you determine the range of the project, so you can weigh the pros and cons of price and the reputation of the plumbers. Get references and contact them. Also, a good plumber isn’t likely to nickel and dime you. For the smaller jobs, check out these 11 plumbing tricks.

After completing an apprenticeship program, plumbers, pipefitters, and steamfitters are considered to be journey workers, qualifying them to perform duties on their own. Plumbers with several years of plumbing experience may earn master status by passing an exam. Some states require a business to employ a master plumber in order to obtain a plumbing contractor’s license.


I would highly recommend Steve Huffman of Steve's plumbing service to anyone who is looking for an experienced and efficient plumber. Having a home that is fixed with old plumbing. Steve quickly answered my distress call and was very thorough in his work very neat and clean. I was very impressed with his knowledge and willingness to keep me informed of what he was doing. His price was exactly to the quote. I will continue to use Steve for all my plumbing and electrical repairs and needs. Mahalo Steve!


Let's start with the easiest possible project: Installing a new shower head is as simple as it gets. Typically, all you have to do is unscrew the old shower head from the shower arm (the pipe coming out of the wall), clean off the threads on the shower arm and wrap a bit of Teflon tape around it, then screw on the new shower head. It's really that simple (and if you don't believe me, check out the video above from Dummies.com). Do read the installation instructions on the shower head you buy, though. Some are designed not to require Teflon tape and can actually leak if you use it.
If you have a major fix in your home, it’s important to shop around for a plumber to do the work. At least three bids will help you determine the range of the project, so you can weigh the pros and cons of price and the reputation of the plumbers. Get references and contact them. Also, a good plumber isn’t likely to nickel and dime you. For the smaller jobs, check out these 11 plumbing tricks.
×