Pro Plumbers

toilets work off of siphon.more correctly it's the timely transfer of water from the tank to the bowl through the ports that starts the siphon and carrys the solids and water downstream,thus completing a flush.i also live in florida and due to lots of hard water everywhere can tell you that most likely the toilets are full of deposits and need to be replaced or are of poor quality.all of the toilets from home depot are trash i would suggest getting one from the factory or from a plumbing supply house.DO NOT GET A 1.28gpf...1.6gpf is still legal
If you have a major fix in your home, it’s important to shop around for a plumber to do the work. At least three bids will help you determine the range of the project, so you can weigh the pros and cons of price and the reputation of the plumbers. Get references and contact them. Also, a good plumber isn’t likely to nickel and dime you. For the smaller jobs, check out these 11 plumbing tricks.
My plumbing experience was  to have the plumbing  disconnected under the sink so the counter top and new sink could be installed.  I thought the service  of $115 was high, but usually if there is an additional fees, it is usually rolled into the cost of repairs or labor.  This company also charged 3.75 % for putting it on a credit card, which was not mentioned until I received the invoice in the mail after paying on the phone.
Water systems of ancient times relied on gravity for the supply of water, using pipes or channels usually made of clay, lead, bamboo, wood, or stone. Hollowed wooden logs wrapped in steel banding were used for plumbing pipes, particularly water mains. Logs were used for water distribution in England close to 500 years ago. US cities began using hollowed logs in the late 1700s through the 1800s. Today, most plumbing supply pipe is made out of steel, copper, and plastic; most waste (also known as "soil")[21] out of steel, copper, plastic, and cast iron.[21]
In addition to Trenchless Technology, Our licensed technicians and OSHA certified excavation crews specialize in traditional tunneling and sub-slab plumbing repair / replacement.  Detailed analysis and fixed cost proposals for repair are provided to customer upon completion of a hydrostatic pressure test and diagnostic slab leak testing, using a combination of cutting-edge pipelining techniques with traditional excavation to fix foundation leaks while minimizing digging and added expense.  Traditional tunnels or trenches for water line repair or sewer repair are hand dug by crews with confined space training.
PVC/CPVC – rigid plastic pipes similar to PVC drain pipes but with thicker walls to deal with municipal water pressure, introduced around 1970. PVC stands for polyvinyl chloride, and it has become a common replacement for metal piping. PVC should be used only for cold water, or for venting. CPVC can be used for hot and cold potable water supply. Connections are made with primers and solvent cements as required by code.[22]
Drain snake. This is a simple, shorter version of the big gas-powered snake that plumbers use to clear clogs deep in your drains. But if the clog is not so deep, owning one of these can save you a good bit of money. They come in different lengths and you can buy powered versions, but a simple 25' snake with a hand-powered crank will set you back less than $25.
The word "plumber" dates from the Roman Empire.[3] The Latin for lead is plumbum. Roman roofs used lead in conduits and drain pipes[4] and some were also covered with lead, lead was also used for piping and for making baths.[5] In medieval times anyone who worked with lead was referred to as a plumber as can be seen from an extract of workmen fixing a roof in Westminster Palace and were referred to as plumbers "To Gilbert de Westminster, plumber, working about the roof of the pantry of the little hall, covering it with lead, and about various defects in the roof of the little hall".[6] Thus a person with expertise in working with lead was first known as a Plumbarius which was later shortened to plumber.
×