Pro Plumbers

Cast iron and ductile iron pipe was long a lower-cost alternative to copper, before the advent of durable plastic materials but special non-conductive fittings must be used where transitions are to be made to other metallic pipes, except for terminal fittings, in order to avoid corrosion owing to electrochemical reactions between dissimilar metals (see galvanic cell).[17]
Before you get involved with most plumbing projects, you'll need to shut off the water flowing to whatever you're working on. Most of the time, there are easy-to-access gate valves or compression valves that you can turn with your hand. Turn them clockwise all the way to turn off the water and counter-clockwise to turn it back on when you're done. For sinks, look under the sink and you'll usually see two valves—one for hot water and one for cold. On kitchen sinks, you might also see valves for the ice maker on your fridge or your dishwasher. Just turn them all off. For toilets, the valves are on the wall or right on the pipe behind the toilet.

If you have a poorly designed or faulty plumbing system at your Oahu commercial property, it is very likely that your business is not as productive as it should be. At Steve’s Plumbing Service, our commercial plumbers provide a wide range of services to ensure that local businesses have the most efficient and functional plumbing systems possible. We can design and install a fully customize plumbing system to fit the unique needs of your business. We offer our customers commercial contracts so that they never have to worry about their plumbing system again.
“Central Penn Plumbing provided outstanding customer service. On a cold winter Saturday morning, we woke up to a very cold house. I gave Central Penn (Scott) a call and within an hour he had a service technician at our house to address the issue. Not only did they resolve the issue on the weekend, but Scott stopped by later in the week to ensure that things were still ok. Outstanding customer service. Thanks Central Penn Plumbing Services!”
The straight sections of plumbing systems are called "pipes" or "tubes". A pipe is typically formed via casting or welding, whereas a tube is made through extrusion. Pipe normally has thicker walls and may be threaded or welded, while tubing is thinner-walled and requires special joining techniques such as brazing, compression fitting, crimping, or for plastics, solvent welding. These joining techniques are discussed in more detail in the piping and plumbing fittings article.
JAG PLUMBING PRODUCTS is very pleased to partner JAG PLUMBING PRODUCTS is very pleased to partner with BRIGGS Plumbing Products USA to act as the direct distributor of the prestigious BRIGGS and Sayco Brand line of Repair Parts. This 2-pack of Toilet tank flappers are the exact replacement required to fix your BRIGGS Toilet. JAG PLUMBING PRODUCTS strives ...  More + Product Details Close

Let's start with the easiest possible project: Installing a new shower head is as simple as it gets. Typically, all you have to do is unscrew the old shower head from the shower arm (the pipe coming out of the wall), clean off the threads on the shower arm and wrap a bit of Teflon tape around it, then screw on the new shower head. It's really that simple (and if you don't believe me, check out the video above from Dummies.com). Do read the installation instructions on the shower head you buy, though. Some are designed not to require Teflon tape and can actually leak if you use it.
Plumbing is any system that conveys fluids for a wide range of applications. Plumbing uses pipes, valves, plumbing fixtures, tanks, and other apparatuses to convey fluids.[1] Heating and cooling (HVAC), waste removal, and potable water delivery are among the most common uses for plumbing, but it is not limited to these applications.[2] The word derives from the Latin for lead, plumbum, as the first effective pipes used in the Roman era were lead pipes.[3]
×