My Mom is in her eightys. I called a plumber in Aug 2012, replaced the McDonnell/Miller LWCO low water cut off 47/2 $675.. Same plumber was called Jan 8,2013 back. He trouble shoot the problem and replaced the same unit, yet I still have the problem. After the heat come on for about 15 mins/ goes off.the pipes connecting to the MM LOCO the vibrating starts, shakes, and makes a loud noise. The boiler is steam, I know it's old. Do I call the same plumber or call someone differently?
Also, you might run into a problem where the shower arm is too short or angled too sharply for the shower head you bought. This can happen more with the wand-type shower heads and the wall gets in the way of the wand. You can solve this problem by making sure you buy a shower head that fits or installing an extension arm onto the main shower arm. You can find those the same place you buy the shower heads.
For over 24 years, PRO Plumbing Services has been a local, trusted family plumber, serving all of Douglas County and the surrounding areas including Castle Rock, Franktown, Elizabeth, Highland's Ranch, Sedalia, South Metro Denver, Front Range, and Parker. All of our employees are background checked and drug tested to ensure only trustworthy technicians are entering your home or business.
"We have found our plumber for life! Jim is awesome! We just bought a house with a leak in the foundation, and in spite of the complicated and extensive nature of the repairs needed, Jim quoted us an incredibly reasonable price. Having just closed on a house, though, we were extremely short on funds, and so to help us out, Jim did a temporary fix for much less, and even though he was going above and beyond and doing this extra work for us, he said he'd even deduct the cost of that repair from the total of the final, permanent repair, when we had that done!! I can't say enough good things about him - there's much more, but I don't have room!"
Although needing emergency service for anything is never fun, if its plumbing service you ned I’d recommend Ben Franklin. The customer service person that took my call was courteous and professional. The service technician arrived well within the appointment time window. He was also courteous and professional. He understood my issue and explained what service was needed and what it would cost. He fixed the problem, cleaned up any debris that occurred during his work. We did the paperwork, he asked if I had any questions and then gave me his contact information in case I needed to call. You can’t beat that! Thanks!
For details about apprenticeship or other opportunities in this occupation, contact the offices of the state employment service; the state apprenticeship agency; local plumbing, heating, and cooling contractors or firms that employ fitters; or local union–management apprenticeship committees. Apprenticeship information is available from the U.S. Department of Labor's Apprenticeship program online, or by phone at 877-872-5627.
I needed to hire a painter for my place of business which is a hair salon. I hired Jose and he was just fantastic! His communication was very thorough and he was on time and he did a wonderful job. I actually needed him to repaint the room from a prior painter who did a very sloppy job. Jose made my room look bright and beautiful and on top of it he cleaned everything so thoroughly. He wanted to leave my room spotless and I could tell he took a lot of pride in his services. I was very impressed with his work and I have already hired him to do a plumbing job next in my salon. He is the nicest guy you want to work with and he has an excellent work ethic. He is very upfront and honest he will tell you what he can or cannot do and his prices are very fair. Jose is going to be my go to guy for any handyman work I need in my salon going forward. I highly recommend him for whatever your handyman needs maybe. This man is a true professional!
Needed to replace a water pressure regulator. Looking at the retail costs of the regulator, they seem to run from abouit $60 to over $300 for one that includes more that the basic control of water pressure in the house. Had not used a pro plumber for over 20 years so I was not up on the costs associated with needing their help. I was contacted by at least 3 plumbers but only one, Right Now Plumbers, gave me an instant quote of $394 for the service without me even asking. Although I thought this price seemed a little high for a job that takes less than an hour to complete, I accepted their service. Must say that the job was done very professionally and would use them again if needed. However,
There’s often an Allen wrench that comes with the garbage disposal. I keep it under the sink. When the thing jams, follow the directions in the manual, and I won’t need to come out. Another plumbing tip, don’t believe the myth about putting lemon peels in the disposal to make it smell better. That will just make it jam faster. These are the things you should never pour down the drain.
The difference between pipes and tubes is simply in the way it is sized. PVC pipe for plumbing applications and galvanized steel pipe for instance, are measured in IPS (iron pipe size). Copper tube, CPVC, PeX and other tubing is measured nominally, which is basically an average diameter. These sizing schemes allow for universal adaptation of transitional fittings. For instance, 1/2" PeX tubing is the same size as 1/2" copper tubing. 1/2" PVC on the other hand is not the same size as 1/2" tubing, and therefore requires either a threaded male or female adapter to connect them. When used in agricultural irrigation, the singular form "pipe" is often used as a plural.
toilets work off of siphon.more correctly it's the timely transfer of water from the tank to the bowl through the ports that starts the siphon and carrys the solids and water downstream,thus completing a flush.i also live in florida and due to lots of hard water everywhere can tell you that most likely the toilets are full of deposits and need to be replaced or are of poor quality.all of the toilets from home depot are trash i would suggest getting one from the factory or from a plumbing supply house.DO NOT GET A 1.28gpf...1.6gpf is still legal
"lead hung on a string to show the vertical line," early 14c., from Old French *plombe, plomee "sounding lead," and directly from Late Latin *plumba, originally plural of Latin plumbum "lead (the metal), lead ball; pipe; pencil," a word of unknown origin, related to Greek molybdos "lead" (dialectal bolimos) and perhaps from an extinct Mediterranean language, perhaps Iberian.
Let's start with the easiest possible project: Installing a new shower head is as simple as it gets. Typically, all you have to do is unscrew the old shower head from the shower arm (the pipe coming out of the wall), clean off the threads on the shower arm and wrap a bit of Teflon tape around it, then screw on the new shower head. It's really that simple (and if you don't believe me, check out the video above from Dummies.com). Do read the installation instructions on the shower head you buy, though. Some are designed not to require Teflon tape and can actually leak if you use it.
Much of the plumbing work in populated areas is regulated by government or quasi-government agencies due to the direct impact on the public's health, safety, and welfare. Plumbing installation and repair work on residences and other buildings generally must be done according to plumbing and building codes to protect the inhabitants of the buildings and to ensure safe, quality construction to future buyers. If permits are required for work, plumbing contractors typically secure them from the authorities on behalf of home or building owners.
Curtis did an excellent job in identifying the problem and providing a couple solutions. We discussed both and came to a mutual agreement, rather than him explicitly saying this is the only option and charge excessive amount. Curtis was very easy to talk to; even though I had lots of questions he was very professional throughout. He was prompt to the appointment, although I forgot about the time, he reached out and waited until I arrive. I would highly recommend their services for your plumbing needs!
Pipe is available in rigid "joints", which come in various lengths depending on the material. Tubing, in particular copper, comes in rigid hard tempered "joints" or soft tempered (annealed) rolls. PeX and CPVC tubing also comes in rigid "joints" or flexible rolls. The temper of the copper, that is whether it is a rigid "joint" or flexible roll, does not affect the sizing.