Galvanized steel potable water supply and distribution pipes are commonly found with nominal pipe sizes from 3⁄8 inch (9.5 mm) to 2 inches (51 mm). It is rarely used today for new construction residential plumbing. Steel pipe has National Pipe Thread (NPT) standard tapered male threads, which connect with female tapered threads on elbows, tees, couplers, valves, and other fittings. Galvanized steel (often known simply as "galv" or "iron" in the plumbing trade) is relatively expensive, and difficult to work with due to weight and requirement of a pipe threader. It remains in common use for repair of existing "galv" systems and to satisfy building code non-combustibility requirements typically found in hotels, apartment buildings and other commercial applications. It is also extremely durable and resistant to mechanical abuse. Black lacquered steel pipe is the most widely used pipe material for fire sprinklers and natural gas.
Wall thickness does not affect pipe or tubing size. 1/2" L copper has the same outer diameter as 1/2" K or M copper. The same applies to pipe schedules. As a result, a slight increase in pressure losses is realized due to a decrease in flowpath as wall thickness is increased. In other words, 1 foot of 1/2" L copper has slightly less volume than 1 foot of 1/2 M copper.
Although plumbers, pipefitters, and steamfitters perform three distinct and specialized roles, their duties are often similar. For example, they all install pipes and fittings that carry water, steam, air, or other liquids or gases. They determine the necessary materials for a job, connect pipes, and perform pressure tests to ensure that a pipe system is airtight and watertight. Their tools include drills, saws, welding torches, and wrenches.
My parents are in their middle eightys and my mother is at home with cancer. They live in SaintAugustine Florida.My problem is their two toilets will not flush all the way down the drain. I. have been down there twice to help them but I cannot drive 1200 miles each time they have a problem.So for now I would like to know what I can translate to my father over the phone to remedy this situation. Thank you very much Ray Dupuis.
When a person has a blockage in their sewage system they often try to fix it themselves by adding an acid or a base such as Drano in an attempt to dissolve or dislodge the problem. These chemicals can get into the plumbers eyes when the sewage is splashed during the repair. The plumbers skin during the repair does come into contact with the sewage water. The owner of the toilet might not report to the plumber they have already tried Drano a highly caustic base .