Pro Plumbers

Wooden pipes were used in London and elsewhere during the 16th and 17th centuries. The pipes were hollowed-out logs, which were tapered at the end with a small hole in which the water would pass through.[16] The multiple pipes were then sealed together with hot animal fat. They were often used in Montreal and Boston in the 1800s, and built-up wooden tubes were widely used in the USA during the 20th century. These pipes, used in place of corrugated iron or reinforced concrete pipes, were made of sections cut from short lengths of wood. Locking of adjacent rings with hardwood dowel pins produced a flexible structure. About 100,000 feet of these wooden pipes were installed during WW2 in drainage culverts, storm sewers and conduits, under highways and at army camps, naval stations, airfields and ordnance plants.

O'Harra's Plumbing provides clients with an experienced plumbing contractor with the proper tools, parts, and knowledge to diagnose your plumbing issues. We will give you expert and honest advice on how to completely satisfy your plumbing needs. We can provide options for some of our plumbing services to best fit your budget. We give our clients an upfront estimate before work is started, so there are no surprises! We are licensed, bonded and insured. We are clean, courteous and respectful of you and your home or business.
The difference between pipes and tubes is simply in the way it is sized. PVC pipe for plumbing applications and galvanized steel pipe for instance, are measured in IPS (iron pipe size). Copper tube, CPVC, PeX and other tubing is measured nominally, which is basically an average diameter. These sizing schemes allow for universal adaptation of transitional fittings. For instance, 1/2" PeX tubing is the same size as 1/2" copper tubing. 1/2" PVC on the other hand is not the same size as 1/2" tubing, and therefore requires either a threaded male or female adapter to connect them. When used in agricultural irrigation, the singular form "pipe" is often used as a plural.[19]
Steve Huffman of Steve's Plumbing Service has made more than one service call to my house. Each time I have been more than pleased with his job. He responds relatively soon to a call. He is a fast and neat worker, at the same time a very efficient and neat worker. He never leaves a mess but cleans up thoroughly when the job is finished. His prices are very reasonable. I do not hesitate to recommend him to my family and close friends.
Wooden pipes were used in London and elsewhere during the 16th and 17th centuries. The pipes were hollowed-out logs, which were tapered at the end with a small hole in which the water would pass through.[16] The multiple pipes were then sealed together with hot animal fat. They were often used in Montreal and Boston in the 1800s, and built-up wooden tubes were widely used in the USA during the 20th century. These pipes, used in place of corrugated iron or reinforced concrete pipes, were made of sections cut from short lengths of wood. Locking of adjacent rings with hardwood dowel pins produced a flexible structure. About 100,000 feet of these wooden pipes were installed during WW2 in drainage culverts, storm sewers and conduits, under highways and at army camps, naval stations, airfields and ordnance plants.
Most states and localities require plumbers to be licensed. Although licensing requirements vary, most states and localities require workers to have 2 to 5 years of experience and to pass an exam that shows their knowledge of the trade and of local plumbing codes before they are permitted to work independently. In addition, most employers require plumbers to have a driver’s license.
The video above from Lowe's shows how to fix leaks in all three types of single-handle faucets. Basically, you're going to remove the handle, pop out the mechanism, and replace it or the surrounding seals. If you can spot which part is causing trouble, you can buy each of the pieces individually. Otherwise, you can buy a faucet repair kit for that type of faucet and replace everything at once. Neither option should be very expensive.
My plumbing experience was  to have the plumbing  disconnected under the sink so the counter top and new sink could be installed.  I thought the service  of $115 was high, but usually if there is an additional fees, it is usually rolled into the cost of repairs or labor.  This company also charged 3.75 % for putting it on a credit card, which was not mentioned until I received the invoice in the mail after paying on the phone.

Before starting any work, we study the issue and perform comprehensive inspections to properly diagnose the problem. Once we have pinpointed the source of the issue, we will discuss your options with you. We try to stick to repairs if possible, and avoid recommending replacements unless your system or unit is extremely outdated. By focusing on repairs instead of replacement, you save money and enjoy an improved plumbing unit for many more years to come.
Need a quick fix? After having a plumber come out to your house, they might tell you the part needed to fix your toilet or sink issue is going to take a week. Don’t be too amenable if you can’t wait. There’s no shame in working with another plumber who can get the part and do the job when you need it. If you’re doing the job yourself, be sure you know these tips for completing a plumbing fix like a pro.
Plastic pipe is in wide use for domestic water supply and drain-waste-vent (DWV) pipe. Principal types include: Polyvinyl chloride (PVC) was produced experimentally in the 19th century but did not become practical to manufacture until 1926, when Waldo Semon of BF Goodrich Co. developed a method to plasticize PVC, making it easier to process. PVC pipe began to be manufactured in the 1940s and was in wide use for Drain-Waste-Vent piping during the reconstruction of Germany and Japan following WWII. In the 1950s, plastics manufacturers in Western Europe and Japan began producing acrylonitrile butadiene styrene (ABS) pipe. The method for producing cross-linked polyethylene (PEX) was also developed in the 1950s. Plastic supply pipes have become increasingly common, with a variety of materials and fittings employed.
Even the smallest issues with your heating or air conditioning can quickly become an emergency. If your furnace is failing to produce heat, or your air conditioner is blowing hot air, call the air conditioning and heating repair company that you can trust. With emergency service available 24/7 by our trusted technicians, keeping reliable cooling and heating is easy all year long.
Not all plumbing companies can guarantee up-front pricing, superior workmanship and parts, licensed and insured plumbing contractors, and courteous support from uniformed professionals. Whether you are in need of drain cleaning or would like to schedule a plumbing inspection for your home, Mr. Rooter's plumbing services can handle it all! Our skilled plumbers are knowledgeable and equipped with the latest tools needed to achieve optimal results. Give us a call at (855) 982-2028, or request a job estimate online.
Curtis did an excellent job in identifying the problem and providing a couple solutions. We discussed both and came to a mutual agreement, rather than him explicitly saying this is the only option and charge excessive amount. Curtis was very easy to talk to; even though I had lots of questions he was very professional throughout. He was prompt to the appointment, although I forgot about the time, he reached out and waited until I arrive. I would highly recommend their services for your plumbing needs!

Before you get involved with most plumbing projects, you'll need to shut off the water flowing to whatever you're working on. Most of the time, there are easy-to-access gate valves or compression valves that you can turn with your hand. Turn them clockwise all the way to turn off the water and counter-clockwise to turn it back on when you're done. For sinks, look under the sink and you'll usually see two valves—one for hot water and one for cold. On kitchen sinks, you might also see valves for the ice maker on your fridge or your dishwasher. Just turn them all off. For toilets, the valves are on the wall or right on the pipe behind the toilet.


For many centuries, lead was the favoured material for water pipes, because its malleability made it practical to work into the desired shape. (Such use was so common that the word "plumbing" derives from plumbum, the Latin word for lead.) This was a source of lead-related health problems in the years before the health hazards of ingesting lead were fully understood; among these were stillbirths and high rates of infant mortality. Lead water pipes were still widely used in the early 20th century, and remain in many households. In addition, lead-tin alloy solder was commonly used to join copper pipes, but modern practice uses tin-antimony alloy solder instead, in order to eliminate lead hazards.[13]
×