Pro Plumbers

I thought that my sump pump had ended its life and needed to be replaced. The contractor I found through Home Adviser came out the following day and arrived reasonably promptly.  The technician tested the pump and it wasn't responding. He then checked the  breaker panel and all seemed well. However he checked to see if power was reaching the outlet, it wasn't so he tripped some breakers and reset them and the power to my pump came on and the pump works so a replacement wasn't necessary. He charged $75.00 which I think was reasonable for a call-out fee and time spent.

When you book a plumber, whether it's to fix a broken boiler or to unclog a drain, you want to know they're skilled enough for the task at hand. Nothing is worse than sending an amateur with a wrench to look at your pipes. Odds are, there will be more damage than when they started. All plumbers on the Handy platform are vetted, verified, and background checked way before they arrive at your home, so you can be sure that they're the right person for the job. 
“Don’t assume that every Mr. Fix-it advertising his services in the local Pennysaver or on Craigslist is a licensed plumber,” says one New York plumber. There is no national standard for issuing licenses. Some plumbers are licensed by the state, others by the counties they work in. Check with your local city hall or chamber of commerce. They should be able to direct you to the appropriate source for a list of licensed plumbers in your area.
It’s impossible to maintain your desired levels of comfort at home or work without the proper plumbing equipment. From hot showers and reliable kitchen appliances to properly flowing sewer lines and leak-free properties, the right plumbing system can keep you from dealing with a heap of plumbing headaches. Leave it to the plumbing professionals to ensure your equipment operates year-round.
Sometimes a faucet leak can be stopped by replacing the rubber washer at the end of a faucet stem or cartridge.  This is a more common repair on older fixtures when things were built to last and designed to be able to be maintained.  Other times the whole stem or cartridge needs replacement or the bibb seat deeper back into the fixture needs replacement.  That leads to matching up the right components and often times making a trip to the hardware store or plumbing supply house necessary due to the many varieties, makes and models of faucets.  My advice is to make sure your Plumber has faucet repair kit on their truck before having them come out to assess the issue.
Galvanized steel potable water supply and distribution pipes are commonly found with nominal pipe sizes from 3⁄8 inch (9.5 mm) to 2 inches (51 mm). It is rarely used today for new construction residential plumbing. Steel pipe has National Pipe Thread (NPT) standard tapered male threads, which connect with female tapered threads on elbows, tees, couplers, valves, and other fittings. Galvanized steel (often known simply as "galv" or "iron" in the plumbing trade) is relatively expensive, and difficult to work with due to weight and requirement of a pipe threader. It remains in common use for repair of existing "galv" systems and to satisfy building code non-combustibility requirements typically found in hotels, apartment buildings and other commercial applications. It is also extremely durable and resistant to mechanical abuse. Black lacquered steel pipe is the most widely used pipe material for fire sprinklers and natural gas.
“Central Penn Plumbing provided outstanding customer service. On a cold winter Saturday morning, we woke up to a very cold house. I gave Central Penn (Scott) a call and within an hour he had a service technician at our house to address the issue. Not only did they resolve the issue on the weekend, but Scott stopped by later in the week to ensure that things were still ok. Outstanding customer service. Thanks Central Penn Plumbing Services!”

Most plumbers, pipefitters, and steamfitters learn their trade through a 4- or 5-year apprenticeship. Apprentices typically receive 2,000 hours of paid on-the-job training, as well as some classroom instruction, each year. In the classroom, apprentices learn safety, local plumbing codes and regulations, and blueprint reading. They also study mathematics, applied physics, and chemistry. Apprenticeship programs are offered by unions and businesses. Although most workers enter apprenticeships directly, some start out as helpers. The Home Builders Institute offers a pre-apprenticeship training program in plumbing and other trades.

Much of the plumbing work in populated areas is regulated by government or quasi-government agencies due to the direct impact on the public's health, safety, and welfare. Plumbing installation and repair work on residences and other buildings generally must be done according to plumbing and building codes to protect the inhabitants of the buildings and to ensure safe, quality construction to future buyers. If permits are required for work, plumbing contractors typically secure them from the authorities on behalf of home or building owners.[citation needed]

Wall thickness does not affect pipe or tubing size.[20] 1/2" L copper has the same outer diameter as 1/2" K or M copper. The same applies to pipe schedules. As a result, a slight increase in pressure losses is realized due to a decrease in flowpath as wall thickness is increased. In other words, 1 foot of 1/2" L copper has slightly less volume than 1 foot of 1/2 M copper.[citation needed]
Most plumbers, pipefitters, and steamfitters learn their trade through a 4- or 5-year apprenticeship. Apprentices typically receive 2,000 hours of paid on-the-job training, as well as some classroom instruction, each year. In the classroom, apprentices learn safety, local plumbing codes and regulations, and blueprint reading. They also study mathematics, applied physics, and chemistry. Apprenticeship programs are offered by unions and businesses. Although most workers enter apprenticeships directly, some start out as helpers. The Home Builders Institute offers a pre-apprenticeship training program in plumbing and other trades.
Todd did an amazing job, and fixed a problem that could of been devastating. Replacing a leaking water heater and also a replacing a failing, leaking main shut of valve. The possibility of major flooding was a real danger It was a 12 unit townhome which made the job even trickier, as water had to be shut off to the entire building while he fixed the valve. Todd, replaced them quickly and expertly, without a hitch. Plumbing repairs are never fun for a homeowner, but these people (especially Todd) do great work. It is definitely a weight lifted off my chest.

Steve Huffman of Steve's Plumbing Service has made more than one service call to my house. Each time I have been more than pleased with his job. He responds relatively soon to a call. He is a fast and neat worker, at the same time a very efficient and neat worker. He never leaves a mess but cleans up thoroughly when the job is finished. His prices are very reasonable. I do not hesitate to recommend him to my family and close friends.
No matter what your plumbing needs, you can count on Benjamin Franklin Plumbing® to provide you with quality professional plumbing services. No job is too big or too small - from the leaky toilet, to the bursting sewer pipe in the front yard - we fix it all!  Whether you need new plumbing equipment installed or existing equipment repaired, we’re here to help.  We offer a full range of plumbing services, including installation, repair or replacement.
Hello! My name is Lorinn and I am 26 years old. I have been working in different construction trades for 8+ years now. To name a few I am a skilled in flooring, cabinets/closets, and electrical(fans, fixtures, etc). I’ve gotten as experienced as I am because I genuinely enjoy working with my hands and learning new things. I take pride in my work, and love exceeding peoples expectations.
Hello I had a plumber do an estimate for me to replace our copper pipes with plastic as we have no existing walls up in our basement yet...pretty basic job... so we figured we could upgrade as we do live in Northern Ontario and it does tend to get quite cold here in the winters.  We dont have any existing problems with our plumbing right now just figured it would be good time to do the job and perhaps change the pipes to 3 quarter inch for faster flow.  Well I never thought in all my life I would get an estimate back that would state $350.00 an hour in labor...yes that is correct $350.00 an hour...estimated 10 hours for the job to be completed.  So he quoted me $3500.00 for labor alone.. not supplies?  Well needless to say I will be happy with my half inch copper pipes and will happily wait for my bathtub to fill up at a slower pace.  Just wanted to know what your thoughts are on this $350.00 an hour quote?  Thank you and enjoy your day.
The difference between pipes and tubes is simply in the way it is sized. PVC pipe for plumbing applications and galvanized steel pipe for instance, are measured in IPS (iron pipe size). Copper tube, CPVC, PeX and other tubing is measured nominally, which is basically an average diameter. These sizing schemes allow for universal adaptation of transitional fittings. For instance, 1/2" PeX tubing is the same size as 1/2" copper tubing. 1/2" PVC on the other hand is not the same size as 1/2" tubing, and therefore requires either a threaded male or female adapter to connect them. When used in agricultural irrigation, the singular form "pipe" is often used as a plural.[19]
×