Pro Plumbers

Wooden pipes were used in London and elsewhere during the 16th and 17th centuries. The pipes were hollowed-out logs, which were tapered at the end with a small hole in which the water would pass through.[16] The multiple pipes were then sealed together with hot animal fat. They were often used in Montreal and Boston in the 1800s, and built-up wooden tubes were widely used in the USA during the 20th century. These pipes, used in place of corrugated iron or reinforced concrete pipes, were made of sections cut from short lengths of wood. Locking of adjacent rings with hardwood dowel pins produced a flexible structure. About 100,000 feet of these wooden pipes were installed during WW2 in drainage culverts, storm sewers and conduits, under highways and at army camps, naval stations, airfields and ordnance plants.
toilets work off of siphon.more correctly it's the timely transfer of water from the tank to the bowl through the ports that starts the siphon and carrys the solids and water downstream,thus completing a flush.i also live in florida and due to lots of hard water everywhere can tell you that most likely the toilets are full of deposits and need to be replaced or are of poor quality.all of the toilets from home depot are trash i would suggest getting one from the factory or from a plumbing supply house.DO NOT GET A 1.28gpf...1.6gpf is still legal

Accurate Leak & Line is specialized in the complete slab leak detection of sub-slab residential or commercial water and sewer piping systems. A combination of the best re-piping and Nu Flow relining repair options is offered to residential customers throughout the state. This wide variety of trenchless or traditional solutions allows our clientele to make the best decisions for their home and their pocketbook. Quality workmanship is always provided in a timely manner on all of our residential jobs, big or small.


Some of the areas that we focus on include offers services in home plumbing needs where if you will be able to repair and remodel your home in Atlanta or suburban Atlanta, we offer you service in all these areas. From sink and faucet repair and replacement, depending on if you are looking for a new look or if you are looking to fix an existing a problem where your sink and faucet is leaking, we can help. We also specialize in toilet repair and replacement, as water-efficient toilets are beneficial to everyone and the environment.
When a plumbing emergency happens, a plumber must be contacted immediately to help sort of the problem. A plumber who goes to a house that has a major water leak can turn off the water to help stop the home from being damaged further. This gives the homeowner a chance to begin cleaning up while the plumber gets to work handling the leak and getting the water turned back on. Any time when the home is being flooded, it is best for an emergency plumber to be called immediately.
Many commercial properties face the same plumbing problems as residential buildings. Usually, the plumbing system is much larger and more complex. The effects of plumbing problems can be much more extensive for commercial buildings, as they can interrupt business and impact profits. So it’s critical that you have a plumbing company you can trust when problems strike to minimize disruption to your operations.

Plumbers on the Handy platform have experience in fixing all the common (and uncommon) plumbing problems that plague homes. Whether you’ve got a water heater leaking, a clogged toilet, or a blocked drain, chances are that your plumber will have seen and dealt with a similar job before. When you use the Handy app or website, you’ll be connected to experienced plumbers who’ll know exactly what to do, no matter how big or small the job might be.
plumbers must be asked directly what they charge hourly and if that is in addition to a service charge. The two are separate and I think they have gotten away with outrageous charges because of the potential of water damaging homeowner structures.   I had a plumber (not Home advisor) come and replace a part in my kitchen sink that was under warranty---the spray nozzle had been leaking...He charged me $85.00 for 15 minutes of work and I will never use Mr King again. 
No plumber is going to come right out and explain that they don’t have the required license to work for you. So if you know someone who is a great plumber, but they don’t have a license, hire them at your own risk. Licensed plumbers know the local building codes and regulations, have completed a certain amount of hours on the job and are insured. Want to become a master plumber yourself? Here are 28 tips.
Get a minimum of three bids. Estimates for an average-sized job should be within a few hundred dollars. Be suspicious of anything that is substantially lower or double the price of the rest, and watch out for hidden fees, like charges for travel expenses. They could be signs of a home improvement scam. A good plumber will not nickel and dime you like this, and many of us will offer free estimates.
toilets work off of siphon.more correctly it's the timely transfer of water from the tank to the bowl through the ports that starts the siphon and carrys the solids and water downstream,thus completing a flush.i also live in florida and due to lots of hard water everywhere can tell you that most likely the toilets are full of deposits and need to be replaced or are of poor quality.all of the toilets from home depot are trash i would suggest getting one from the factory or from a plumbing supply house.DO NOT GET A 1.28gpf...1.6gpf is still legal
For many centuries, lead was the favoured material for water pipes, because its malleability made it practical to work into the desired shape. (Such use was so common that the word "plumbing" derives from plumbum, the Latin word for lead.) This was a source of lead-related health problems in the years before the health hazards of ingesting lead were fully understood; among these were stillbirths and high rates of infant mortality. Lead water pipes were still widely used in the early 20th century, and remain in many households. In addition, lead-tin alloy solder was commonly used to join copper pipes, but modern practice uses tin-antimony alloy solder instead, in order to eliminate lead hazards.[13]
×