Pro Plumbers

PVC/CPVC – rigid plastic pipes similar to PVC drain pipes but with thicker walls to deal with municipal water pressure, introduced around 1970. PVC stands for polyvinyl chloride, and it has become a common replacement for metal piping. PVC should be used only for cold water, or for venting. CPVC can be used for hot and cold potable water supply. Connections are made with primers and solvent cements as required by code.[22]
Needed to replace a water pressure regulator.  Looking at the retail costs of the regulator, they seem to run from abouit $60 to over $300 for one that includes more that the basic control of water pressure in the house.  Had not used a pro plumber for over 20 years so I was not up on the costs associated with needing their help.  I was contacted by at least 3 plumbers but only one, Right Now Plumbers, gave me an instant quote of $394  for the service without me even asking. Although I thought this price seemed a little high for a job that takes less than an hour to complete, I accepted their service.  Must say that the job was done very professionally and would use them again if needed.  However,
Drain snake. This is a simple, shorter version of the big gas-powered snake that plumbers use to clear clogs deep in your drains. But if the clog is not so deep, owning one of these can save you a good bit of money. They come in different lengths and you can buy powered versions, but a simple 25' snake with a hand-powered crank will set you back less than $25.
Hello my name is Sam and I have been in the home renovation and remodeling business as well as swimming pools for over 25 years. I grew up in a family that owned skilled trade businesses. I possess abilities in all facets of the trades including but not limited to carpentry, plumbing, electrical, and more. I also have strong knowledge of home automation for lights and appliances.
PBT – flexible (usually gray or black) plastic pipe which is attached to barbed fittings and secured in place with a copper crimp ring. The primary manufacturer of PBT tubing and fittings was driven into bankruptcy by a class-action lawsuit over failures of this system.[citation needed] However, PB and PBT tubing has since returned to the market and codes, typically first for "exposed locations" such as risers.
I had 207 Plumbing come to fix a leak in my ceiling.  It's a terrible, terrible company to do business with.  He came and fixed a broken pipe in the ceiling, and I asked him to check the rest of the pipe to make sure that nothing else was broken, he said everything was OK and charged me $219.00 for 45 minutes and left.  Never cleaned up his mess.  I went to clean up the mess after he left and found there was more damage to the pipe.  I called him to come back, which he did.  He looked at the water coming down from the ceiling, into a light fixture and said he had another job to go to and couldn't come back until next week.  He also wanted to charge me $350.00 to come back.  I told him that was too much and he said he would make an exception and only charge me $219.00.  Now I have major damage done to the ceiling, the light fixture and the floor.  All of this could have been prevented if he had stayed and fixed the problem.  I will NOT hire him again.
Alejandro is the best, most versatile plumber I have ever used. When I needed a new toilet installed in a guest bedroom, he also did a great job replacing the the damaged tile work around the base of the old toilet. When I had new countertops installed in my kitchen, he came up with a creative solution to a problem I had with the old gas line running to my stove-top. He is not expensive, a nice guy and a true professional.
I had called Ben Franklin to fix a pin hole leak in the meter horn. Booking an appointment was very easy and the crew (Sid and Brandon) showed up on time. They quickly found out that a stop valve was not working and had to be replaced as well. Sid clearly explained my options and the charges upfront. He dealt with the city for water shut off, went about the job in a quick and efficient manner. Sid was very professional and explained clearly what he was doing. He patiently answered all my questions. Brandon was very practical and frank. As they were finishing up (I had to leave the house for an hour) they spotted a leak in another valve and fixed that also. I thought it was highly ethical of them to do so. Thank you Sid and Brandon!

There are few things worse than waiting for a plumber after being given an 8 hour time window, while your sink is spouting water all over the carpet or your toilet is overflowing. Using the Handy platform, you can arrange an exact time for your plumber to arrive, which means you don’t have to take an entire day off of work to sit around and wait for them. The plumbers on the Handy platform have seen it all and they have the ratings and reviews to prove it.  We’ll match the details of your job with a reliable plumber in your area before you know it.


“I have used Central Penn for many repairs/installs over the last 15 years. They have always responded in a prompt manner and I found their people to be very friendly, efficient and competent in diagnosing and repairing any issues I had, whether related to plumbing or HVAC. Furthermore, which you can’t take for granted these days, the guys are very respectful of your home and are careful in their work and thoroughly clean up after the job is completed.”


Pipe is available in rigid "joints", which come in various lengths depending on the material. Tubing, in particular copper, comes in rigid hard tempered "joints" or soft tempered (annealed) rolls. PeX and CPVC tubing also comes in rigid "joints" or flexible rolls. The temper of the copper, that is whether it is a rigid "joint" or flexible roll, does not affect the sizing.[19]
Rick’s Plumbing has been a mainstay within New Haven and Fairfield Counties since 1992. As a premier local plumbing service, we have been around for the community to complete any type of job – big or small. We only hire skilled professional plumbers to complete each task for our customers, ensuring the highest level of service is achieved within the shortest time possible. Whether you are looking for plumbing service or heating service, we’ve got you covered.
If nothing inside the home was altered you should not be getting a smell. Personally I'm confused as to why the repair person would have left the original line there and ran another one through a new hole. I would have pulled the old line up, ran the new line (in PVC) and used the same hole in the septic tank instead of creating a new one. Did he seal up the hole in the tank from the old line?
Also, you might run into a problem where the shower arm is too short or angled too sharply for the shower head you bought. This can happen more with the wand-type shower heads and the wall gets in the way of the wand. You can solve this problem by making sure you buy a shower head that fits or installing an extension arm onto the main shower arm. You can find those the same place you buy the shower heads.
If there’s a plumbing problem in your home, Abacus Plumbing will fix it. Abacus plumbers are background-checked, highly trained, and state licensed; therefore, you’ll be getting a quality technician to service your home’s plumbing network. Abacus plumbers have years of experience repairing residential plumbing systems; there isn’t an issue they have not tackled, including:
The Handy customer service team is online 24 hours a day, 7 days a week. If you have any concerns either before, during, or after your job, someone will be in contact with you to help make things right. No matter how big or small your job is, we’re confident that you’ll be satisfied by the plumbing professionals on the Handy platform. When you book plumbing services through Handy, you’re in charge of when the work gets done. And should your situation change, you can always cancel or reschedule your appointment with at least to 24 hours’ notice.

The straight sections of plumbing systems are called "pipes" or "tubes". A pipe is typically formed via casting or welding, whereas a tube is made through extrusion. Pipe normally has thicker walls and may be threaded or welded, while tubing is thinner-walled and requires special joining techniques such as brazing, compression fitting, crimping, or for plastics, solvent welding. These joining techniques are discussed in more detail in the piping and plumbing fittings article.
×